Mocomtech CRS-300 operation manual ASI Data Connections

CRS-300 1:10 Redundancy Switch	Revision 16
Cables and Connections	MN/CRS300.IOM

•DB-9F connector labeled “1:1 Control” on the Traffic CDM-625(s).

Finally, for Balanced G.703 data only, connect and secure the Data Cable CA-0000072 (DB-15F to DB-9M, 6’) between the TMI(s) and Traffic CDM-625(s) as follows:

•DB-15M connector labeled “P2” on the TMI(s), to

•DB-9F connector labeled “Balanced G.703” on the Traffic CDM-625(s).

–or–

For Unbalanced G.703 data only, connect and secure the pair of PL/0813-8 cables (75Ω BNC to BNC, 8’) as follows:

•BNC connector labeled “J3 Tx”on the TMI(s) to BNC connector labeled “Unbal G.703/ASI – IN” on the Traffic CDM-625s, and

•BNC connector labeled “J5 Rx”on the TMI(s) to BNC connector labeled “Unbal G.703/ASI – OUT” on the Traffic CDM-625(s).

4.5.3.3ASI Data Connections

If ASI is the driving traffic data type (refer to Figure 4-10through Figure 4-12):

First, connect the Control/Data Cable CA/WR0066 (for control purposes) between the Redundant CDM-625 and the RMI (see Sect. 4.5.3.1).

Next, connect and secure a pair of PL/0813-8 cables (75Ω BNC to BNC, 8’), for data purposes, between the Redundant CRS-625 and the RMI as follows:

•BNC connector labeled “J3 Tx” on the RMI to BNC connector labeled “Unbal G.703/ASI – IN” on the Redundant CDM-625, and

•BNC connector labeled “J2 Rx” on the RMI to BNC connector labeled “Unbal G.703/ASI – OUT” on the Redundant CDM-625.

Then, connect and secure a pair of PL/0813-8 cables (75Ω BNC to BNC, 8’) between the CRS-325 TMI(s) and the Traffic CDM-625(s) as follows:

•BNC connector labeled “J3 Tx” on the TMI(s), to BNC connector labeled “Unbal G.703/ASI – IN” on the Traffic CDM-625(s), and

•BNC connector labeled “J5 Rx”on the TMI(s) to BNC connector labeled “Unbal G.703/ASI – OUT” on the Traffic CDM-625(s).

Finally, connect and secure the Control Cable CA-0000069 (HD-15M to DB-9M, 6’) between the CRS-325 TMI(s) and Traffic CDM-625(s) as follows:

•HD-15F connector labeled “J1” on the TMI(s), to

•DB-9F connector labeled “1:1 Control” on the Traffic CDM-625(s).

4–26