Furuno GP-3300, GD-3300 manual Loran TD Correction, Cancelling chart position correction, 11-7

2.Select YES from the POS CORR field.

3.Select Δ L/L from the MODE field.

4.Enter latitude and longitude correction values.

5.Press the [ENT] key.

Cancelling chart position correction

1.Press [MENU] and [6].

2.Select NO from the POS CORR field.

3.Press the [ENT] key.

11.6Loran TD Correction

When the Loran A or Loran C TD display shows constant error you can correct it as follows:

1. Press the [MENU] key.

8 INITIAL SETTINGS

AUTOPILOT DISPLAY	=	ON	OFF
TD INDICATION	= LA		LC OFF
STATION PAIR	= 00-01
TO CORRECTION 1	= 000.0 μS
TO CORRECTION 2	= 000.0 μS
SELF TEST	: OK
PROGRAM NO.	: 14517020xx

Figure 11-10 INITIAL SETTINGS menu, lower half

2.Press the [8] key to display the INITIAL SETTINGS menu.

3.Select TD CORRECTION 1.

4.Enter TD correction value in microseconds. If the value is -0.1 microseconds, for example, press [0], [0], [0], and [1].

5.Select TD CORRECTION 2 and enter TD correction value in microseconds.

6.Press the [ENT] key.

11-7