Video Pilot Display, Features | Furuno GP-3300, GD-3300 guide

VIDEO PILOT DISPLAY, NAVIGATION DATA DISPLAY

7.1 Video Pilot Display

Features

The video pilot display shows navigation information about your destination, using a course-up presentation. To display the video pi- lot display, press the [VIDEO PILOT] key. Figure 7-1 shows a typi- cal video pilot display.

34° 44.465’ N 355.6° 95.59NM 135° 21.289’ E 1.1KTS 0.01NM

2D 1.2

0.05

0.10

North marker (Arrow points to true North)

0.05

O09:56

170

0.01NM

VTD

0.4KTS

TTG

ETA

Mark data

Destination data

Figure 7-1 Sample video pilot display

Table 7-1 compares the features of the video pilot and plot displays.

7-1

Page 74

Image 74

Furuno GP-3300, GD-3300 manual Video Pilot Display, Features, Compares the features of the video pilot and plot displays

Contents

Page 00080834300 Safety Instructions About the TFT LCD Furuno agent or dealer Table of Contents External Event Mark Target Mark Lines Video Pilot Display Navigation Data Display Time Differences Geodetic Chart List Chart Symbols, Contour Lines Attributes12.1 Preventive Maintenance 12-1 12.2 11.9 Memory Capacity Foreword Word to Furuno GD-3300/GP-3300 Owners Features Vii Menu Tree Viii System Configuration GPS Antenna Unit GPA-017S Operational Overview Control Description Inserting Chart Cards Control description Turning the Power On/Off Turning the power on Turning the cursor on/off TrackballCursor Cursor information Shifting the DisplayReturning Own Ship Marker to Screen Center +36 44.257’ N How to select screen center Selecting Screen Center by Cursor Position Chart Scale Display Brilliance and Key Backlighting Insert chart card label side up in the lower slot Card Drives, Chart CardsDisplaying an electronic chart with the power turned on Card drives Care and handling of the cards Ejecting the chart cardChart card troubleshooting Press the eject button Table below shows Furuno chart symbols and their meanings Chart iconsFuruno chart symbols Comparison of FURUNO, Navionics chart cards Buoy, lighthouse data display on Navionics charts Data shown when cursor is on Data Window Video pilot mode description Data shown when cursor is offPlot mode description Nav data mode description Menu Operation Menu operation versus key operation Main menu description Main menu description Entering data Operation on the DisplaySelecting options Summary of menu operation Economy Mode Operational Status Icons +36 44.257’ N 140.50 35.92NM 134 40.719’ E Plot Mode DisplaysPlot display when cursor is on Plot display when cursor is off 36 44.257’ N Setting the Time and Date 22 Initial Settings menu 340.5 TrackStopping Track Recording Press MENU, 9 and 1 to display the EDIT/TRACK Mark menu Track ColorChanging Color, Appearance of Specific Track EDIT/TRACK Mark menu Deleting specific track with cursor, box cursor Deleting TrackDeleting track by color Press MENU, 9, 1 to display the EDIT/TRACK menu Deleting all track Delete Track display Plot interval and track reconstruction Track Plotting IntervalHow the track is drawn Plot interval by time or distance Setting plot interval 1 by time Setting plot interval 2 to time Customizing the Hold Function Turning off track display when track is not being recordedConnecting track after restarting track recording Customizing the Plot Intvl Key Setup for manually entering plot intervalTuning off a plot interval Page Entering marks with the cursor MARKS, LinesEntering Marks Entering marks at own ship’s position Changing Current Mark Color Press the Mark Color key to show the Change Mark Color menu Changing Shape, Color of Specific Marks Deleting all marks Deleting MarksDeleting specific marks Deleting marks with the cursor Lines External Event MarkTarget Mark Erasing an external event mark Deleting lines Entering a lineChanging line color Waypoints Waypoints Place the data input cursor on waypoint Entering WaypointsWaypoint entry by L/L coordinates Waypoint entry by cursor Waypoint entry at own ship’s position Waypoint entry by range and bearing Entering a Comment for a Waypoint Waypoint entry by navigation aid Turning Specific Waypoint Displays On/Off Deleting Waypoints Deleting waypoints by cursor Deleting waypoints through waypoint list Setting destination waypoint by cursorDestination Waypoint Deleting external waypoint Setting destination waypoint by waypoint number Setting destination waypoint by range and bearing When you set a destination waypoint 11 How a destination waypoint is shown on the display 134 20.524’ E Displaying range and bearing to destination waypoint36 34.000’ N Press the Plot key to display the Data Display Cancelling destination waypoint by key input Cancelling Destination WaypointCancelling destination waypoint through the menu Select Cancel from the Dest field Press the ENT key Route Navigation Sample route Creating Routes Creating routes through the route list Press the Route key to display the Route NO. menu Creating routes with waypoint numbers Menu keyCreating routes with waypoint numbers Route key Press the Route to display the Route NO. menu Creating routes with the cursorSelect WPT no Enter waypoint numbers Press the ENT key Following a Route About route navigation Example of when to deselect waypoints Temporarily Deselecting a Route Waypoint Deleting Route Waypoints Deleting specific route waypoints Cancelling Route Navigation Deleting all route waypoints Route Calculation 10 Route list Arrival alarm AlarmsArrival Alarm, Anchor Watch Alarm Anchor watch alarm Alarm range of arrival alarm XTE alarm XTE Alarm, Border AlarmBorder alarm Ship’s Speed Alarm Press ← twice Silencing the alarm buzzer When the Alarm Buzzer SoundsWhat alarm is sounding? Video Pilot Display FeaturesCompares the features of the video pilot and plot displays Destination data Mark data 34 44.463’ N Comparison of plot and video pilot displays34 44.463’ 135 21.288’ E 44 N 135 21 E Navigation Data Display Features Available with Autopilot Connection Autopilot Data Autopilot Information on Plot Display Sample autopilot information on plot display Autopilot Information on Video Pilot Display 134 40.719’ E 10.0KTS Autopilot in Manual mode Autopilot in Auto mode Autopilot in NAV mode Autopilot on, destination waypoint selected Press the 3 key to select Save Data to Memory Card Memory Card OperationsFormatting Memory Cards Saving Data to Memory Cards Save Track display Playing Back Memory Cards File name example Playing back initial settings Saving, Playing Back Initial SettingsSaving initial settings Press the 5 key to select Display Memory Card Deleting files Editing Memory CardsDeleting track, marks/lines from a memory card Adding track, marks/lines GPS receiver status GPS Receiver Operation GP-3300GPS Information on the Navigation Data Display 10-1 10-2 Satellite scheduleFrequency deviation 10-3 GPS and Dgps Initial SettingsSatellite data 10-4 GPS initial settings menu descriptionDescribes the GPS Initial Settings menu Press Menu and 8, and then press − to set the cursor on Satellite Force Health/Deselection10-5 Latitude and longitude GPS smoothing GPS SmoothingSpeed and course GPS smoothing 10-6 Setting GPS smoothing 10-7 Cold Start 10-8 Correcting GPS Position Selecting chart systemGeodetic Datum 10-9 Displaying position in Loran a TDs Other FunctionsDisplaying Position in Loran TDs 11-1 11-2 Bearing Display ReferenceDisplaying position in Loran C TDs 11-3 Magnetic DeviationDisplaying true bearing Changing Chart Appearance 11-4 11-5 Correcting Chart PositionCorrecting chart position by cursor 11-6 Correcting chart position by latitude and longitudeCorrections chart position by Δ Delta L/L 11-7 Cancelling chart position correctionLoran TD Correction 11-8 Calculating R/B Between Two PointsCalculating R/B by latitude and longitude Calculating R/B by waypoint numbers 11-9 Default memory arrangement is as shown in Figure Locking Preferred SettingsLocking or unlocking preferred settings Memory Capacity 11-11 When the track memory becomes full oldest track is deletedTrack memory Mark/line memory When the mark memory becomes full no marks can be enteredApportioning the Memory 11-12 Reading Number of Track, Marks Used 11-13 Smoothing 11-14 Selecting Navaid 11-15 Track, Mark and Marker Attributes 11-16 11-17 Initial settings menuSpecial menu Customizable items on the Initial Settings menu 11-18 Select item and option as appropriate Press the ENT key Chart Symbols, Contour Lines Attributes11-19 12-1 Maintenance & TroubleshootingPreventive Maintenance Memory circuits, I/O ports Diagnostic TestsSelf test at power on 12-2 To escape from the test, press any key Keyboard test12-3 12-4 Test pattern 1 color dropoutTest pattern 2 color distortion Check the pattern for color dropout Press any key to escape Error Messages 12-5 No file by that name exists 12-6Memory card replaced during operation No files on memory card to delete Waypoint being used as destination waypoint Replacement of Fuse12-7 12-8 Replacement of BatteriesMemory card battery GPS section GP-3300 Verifying Program Version NoPlotter section 12-9 Troubleshooting Table 12-10 12-11 Clearing Memories 12-12 12-13 Press the 8 key to select Clear Memory Appendix Time Differences Geodetic Chart List Adindan Specifications of Color Video PLOTTER/COLOR GPS Plotter GD/GP-3300 Coating Color Index Index-1 Index-2 Index-3