Furuno GP-3300, GD-3300 manual Setting plot interval 1 by time, Setting plot interval 2 to time

Setting plot interval 1 by time

The default plot method for plot interval 1 is time. To set plot interval

1 by time do the following:

1.Press the [MENU] key.

2.Press the [8] key to select INITIAL SETTINGS.

3.Select the PLOT INTERVAL 1 field.

8 INITIAL SETTINGS

INTERNAL NAV	=			ON		OFF
EXTERNAL NAV	= GPS					LC LA DC DR OFF
I/O DATA FORMAT	= CIF				NMEA183		NMEA180/182
SMOOTHING	= 00 (0-15)
PLOT INTERVAL 1	=		TIME			(00M10S)	DIST (0.10NM)
PLOT INTERVAL 2	= TIME (00M10S)						DIST	(0.10NM)
WAYPOINT MARK		=		ON		OFF

Figure 2-11 INITIAL SETTINGS menu

4.Enter a plot interval. To enter 30 seconds, for example, press [0], [0], [3] and [0].

5.Press the [ENT] key.

Setting plot interval 2 to “time”

The default plot method for PLOT INTERVAL 2 is distance. How- ever, it may be set for time as follows:

1.Press the [MENU] key.

2.Press the [8] key to select INITIAL SETTINGS.

3.Select the PLOT INTERVAL 2 field.

4.Select TIME.

5.Enter a plot interval. To enter 15 minutes, for example, press [1], [5], [0], [0].

6.Press the [ENT] key.

2-7