Bearing Display Reference, 11-2 | Furuno GD-3300, GP-3300 guide

3.Select LA.

4.Select STATION PAIR, and station pair codes list appears.

00: 1L0	01: 1L1	02: 1L4	03: 1L5		04: 1L6
05: 1L7	06: 1S1	07: 1S2	08: 1S3		09: 1S4
10: 1S6	11: 2H3	12: 2H4	13:	2H5	14:	2H6
15: 2S0	16: 2S1	17: 2S2	18:	2S3	19:	2S4
20: 2S5	21: 2S6	22: 2S7

5.Enter station pair codes.

6.Press the [ENT key].

Displaying position in Loran C TDs

To display ship’s position in Loran C TDs;

1.Press [MENU] and [8] to display the INITIAL SETTINGS menu.

2.Select TD INDICATION.

3.Select LC.

4.Select STATION PAIR, and GRI code number list appears.

00: 7970	01: 9960	02: 7980	03: 8970
04: 9940	05: 5990	06: 7960	07: 9990
08: 4990	09: 9970	10: 7990	11: 5930
12: 5970	13: 7930	14: 9980	15: 7950
16: 7170	17: 8990	18: 8000	19: 9610

20:8290

5.Enter GRI code number.

6.Station pair code appears for the GRI selected. Enter station pair code.

00: 11000

01: 26000

02: 46000

03: 60000

7.Press the [ENT] key.

11.2Bearing Display Reference

A navigation device outputs both true and magnetic bearings. A mag- netic bearing is true bearing plus (or minus) earth’s magnetic devia- tion. Thus the equation for finding magnetic bearing is;

true bearing ± x (magnetic variation)° = magnetic bearing

You can display your ship’s course and bearing to waypoint in true or magnetic bearing.

11-2

Image 99

Furuno GD-3300, GP-3300 manual Bearing Display Reference, Displaying position in Loran C TDs, 11-2

Contents

Page 00080834300 Safety Instructions Furuno agent or dealer About the TFT LCD Table of Contents Video Pilot Display Navigation Data Display External Event Mark Target Mark Lines 11.9 Memory Capacity Chart Symbols, Contour Lines Attributes12.1 Preventive Maintenance 12-1 12.2 Time Differences Geodetic Chart List Word to Furuno GD-3300/GP-3300 Owners Foreword Vii Features Viii Menu Tree GPS Antenna Unit GPA-017S System Configuration Control Description Operational Overview Control description Inserting Chart Cards Turning the power on Turning the Power On/Off Trackball CursorTurning the cursor on/off +36 44.257’ N Shifting the DisplayReturning Own Ship Marker to Screen Center Cursor information Selecting Screen Center by Cursor Position How to select screen center Display Brilliance and Key Backlighting Chart Scale Card drives Card Drives, Chart CardsDisplaying an electronic chart with the power turned on Insert chart card label side up in the lower slot Press the eject button Ejecting the chart cardChart card troubleshooting Care and handling of the cards Chart icons Furuno chart symbolsTable below shows Furuno chart symbols and their meanings Buoy, lighthouse data display on Navionics charts Comparison of FURUNO, Navionics chart cards Data Window Data shown when cursor is on Nav data mode description Data shown when cursor is offPlot mode description Video pilot mode description Menu operation versus key operation Menu Operation Main menu description Main menu description Summary of menu operation Operation on the DisplaySelecting options Entering data Operational Status Icons Economy Mode Plot Mode Displays Plot display when cursor is on+36 44.257’ N 140.50 35.92NM 134 40.719’ E 36 44.257’ N Plot display when cursor is off 22 Initial Settings menu Setting the Time and Date Track Stopping Track Recording340.5 Track Color Changing Color, Appearance of Specific TrackPress MENU, 9 and 1 to display the EDIT/TRACK Mark menu EDIT/TRACK Mark menu Press MENU, 9, 1 to display the EDIT/TRACK menu Deleting TrackDeleting track by color Deleting specific track with cursor, box cursor Delete Track display Deleting all track Plot interval by time or distance Track Plotting IntervalHow the track is drawn Plot interval and track reconstruction Setting plot interval 2 to time Setting plot interval 1 by time Turning off track display when track is not being recorded Connecting track after restarting track recordingCustomizing the Hold Function Setup for manually entering plot interval Tuning off a plot intervalCustomizing the Plot Intvl Key Page Entering marks at own ship’s position MARKS, LinesEntering Marks Entering marks with the cursor Press the Mark Color key to show the Change Mark Color menu Changing Current Mark Color Changing Shape, Color of Specific Marks Deleting marks with the cursor Deleting MarksDeleting specific marks Deleting all marks Erasing an external event mark External Event MarkTarget Mark Lines Entering a line Changing line colorDeleting lines Waypoints Waypoints Entering Waypoints Waypoint entry by L/L coordinatesPlace the data input cursor on waypoint Waypoint entry by cursor Waypoint entry by range and bearing Waypoint entry at own ship’s position Waypoint entry by navigation aid Entering a Comment for a Waypoint Turning Specific Waypoint Displays On/Off Deleting waypoints by cursor Deleting Waypoints Deleting external waypoint Setting destination waypoint by cursorDestination Waypoint Deleting waypoints through waypoint list Setting destination waypoint by range and bearing Setting destination waypoint by waypoint number 11 How a destination waypoint is shown on the display When you set a destination waypoint Press the Plot key to display the Data Display Displaying range and bearing to destination waypoint36 34.000’ N 134 20.524’ E Select Cancel from the Dest field Press the ENT key Cancelling Destination WaypointCancelling destination waypoint through the menu Cancelling destination waypoint by key input Sample route Route Navigation Creating routes through the route list Creating Routes Creating routes with waypoint numbers Menu key Creating routes with waypoint numbers Route keyPress the Route key to display the Route NO. menu Creating routes with the cursor Select WPT no Enter waypoint numbers Press the ENT keyPress the Route to display the Route NO. menu About route navigation Following a Route Temporarily Deselecting a Route Waypoint Example of when to deselect waypoints Deleting specific route waypoints Deleting Route Waypoints Deleting all route waypoints Cancelling Route Navigation 10 Route list Route Calculation Alarms Arrival Alarm, Anchor Watch AlarmArrival alarm Alarm range of arrival alarm Anchor watch alarm XTE Alarm, Border Alarm Border alarmXTE alarm Press ← twice Ship’s Speed Alarm When the Alarm Buzzer Sounds What alarm is sounding?Silencing the alarm buzzer Features Compares the features of the video pilot and plot displaysVideo Pilot Display Mark data Destination data 135 21.288’ E Comparison of plot and video pilot displays34 44.463’ 34 44.463’ N Navigation Data Display 44 N 135 21 E Autopilot Data Features Available with Autopilot Connection Sample autopilot information on plot display Autopilot Information on Plot Display 134 40.719’ E 10.0KTS Autopilot Information on Video Pilot Display Autopilot in Auto mode Autopilot in Manual mode Autopilot on, destination waypoint selected Autopilot in NAV mode Memory Card Operations Formatting Memory CardsPress the 3 key to select Save Data to Memory Card Saving Data to Memory Cards Save Track display File name example Playing Back Memory Cards Press the 5 key to select Display Memory Card Saving, Playing Back Initial SettingsSaving initial settings Playing back initial settings Adding track, marks/lines Editing Memory CardsDeleting track, marks/lines from a memory card Deleting files 10-1 GPS Receiver Operation GP-3300GPS Information on the Navigation Data Display GPS receiver status Satellite schedule Frequency deviation10-2 GPS and Dgps Initial Settings Satellite data10-3 GPS initial settings menu description Describes the GPS Initial Settings menu10-4 Satellite Force Health/Deselection 10-5Press Menu and 8, and then press − to set the cursor on 10-6 GPS SmoothingSpeed and course GPS smoothing Latitude and longitude GPS smoothing 10-7 Setting GPS smoothing 10-8 Cold Start 10-9 Selecting chart systemGeodetic Datum Correcting GPS Position 11-1 Other FunctionsDisplaying Position in Loran TDs Displaying position in Loran a TDs Bearing Display Reference Displaying position in Loran C TDs11-2 Magnetic Deviation Displaying true bearing11-3 11-4 Changing Chart Appearance Correcting Chart Position Correcting chart position by cursor11-5 Correcting chart position by latitude and longitude Corrections chart position by Δ Delta L/L11-6 Cancelling chart position correction Loran TD Correction11-7 Calculating R/B Between Two Points Calculating R/B by latitude and longitude11-8 11-9 Calculating R/B by waypoint numbers Memory Capacity Locking Preferred SettingsLocking or unlocking preferred settings Default memory arrangement is as shown in Figure When the track memory becomes full oldest track is deleted Track memory11-11 11-12 When the mark memory becomes full no marks can be enteredApportioning the Memory Mark/line memory 11-13 Reading Number of Track, Marks Used 11-14 Smoothing 11-15 Selecting Navaid 11-16 Track, Mark and Marker Attributes Initial settings menu Special menu11-17 11-18 Customizable items on the Initial Settings menu Chart Symbols, Contour Lines Attributes 11-19Select item and option as appropriate Press the ENT key Maintenance & Troubleshooting Preventive Maintenance12-1 12-2 Diagnostic TestsSelf test at power on Memory circuits, I/O ports Keyboard test 12-3To escape from the test, press any key Check the pattern for color dropout Press any key to escape Test pattern 1 color dropoutTest pattern 2 color distortion 12-4 12-5 Error Messages No files on memory card to delete 12-6Memory card replaced during operation No file by that name exists Replacement of Fuse 12-7Waypoint being used as destination waypoint Replacement of Batteries Memory card battery12-8 12-9 Verifying Program Version NoPlotter section GPS section GP-3300 12-10 Troubleshooting Table 12-11 12-12 Clearing Memories Press the 8 key to select Clear Memory 12-13 Time Differences Appendix Adindan Geodetic Chart List GD/GP-3300 Specifications of Color Video PLOTTER/COLOR GPS Plotter Coating Color Index-1 Index Index-2 Index-3