Autopilot Data | Furuno GP-3300, GD-3300 specs

AUTOPILOT DATA

With autopilot connection, you can display various autopilot infor- mation on the display. This chapter describes what information you receive with autopilot connection.

8.1 Features Available with Autopilot Connection

The following features are available with autopilot (for example,

FURUNO FAP-330) connection:

•The FAP-330 feeds autopilot information to the GD/GP-3300 for display on the plot and video pilot displays.

•In the AUTO mode the FAP-330 automatically controls rudder movement in order to steer the vessel on a set course, thereby ne- gating the effects of wind and current.

•When you restart the NAV mode when navigating a route, a line is drawn between restart point and next intermediate route waypoint. See Figure 8-1.

•The autopilot display can be turned on or off on the INITIAL SET- TINGS menu.

NAV mode

suspended

Previous courseline

Ship	New courseline
moved
here.	NAV mode
	NAV mode
	restarted

Figure 8-1 Courseline to next intermediate point drawn when NAV

mode is restarted while navigating a route

8-1

Image 78

Furuno GP-3300, GD-3300 manual Autopilot Data, Features Available with Autopilot Connection

Contents

Page 00080834300 Safety Instructions About the TFT LCD Furuno agent or dealer Table of Contents External Event Mark Target Mark Lines Video Pilot Display Navigation Data Display Time Differences Geodetic Chart List Chart Symbols, Contour Lines Attributes12.1 Preventive Maintenance 12-1 12.2 11.9 Memory Capacity Foreword Word to Furuno GD-3300/GP-3300 Owners Features Vii Menu Tree Viii System Configuration GPS Antenna Unit GPA-017S Operational Overview Control Description Inserting Chart Cards Control description Turning the Power On/Off Turning the power on Trackball CursorTurning the cursor on/off Cursor information Shifting the DisplayReturning Own Ship Marker to Screen Center +36 44.257’ N How to select screen center Selecting Screen Center by Cursor Position Chart Scale Display Brilliance and Key Backlighting Insert chart card label side up in the lower slot Card Drives, Chart CardsDisplaying an electronic chart with the power turned on Card drives Care and handling of the cards Ejecting the chart cardChart card troubleshooting Press the eject button Chart icons Furuno chart symbolsTable below shows Furuno chart symbols and their meanings Comparison of FURUNO, Navionics chart cards Buoy, lighthouse data display on Navionics charts Data shown when cursor is on Data Window Video pilot mode description Data shown when cursor is offPlot mode description Nav data mode description Menu Operation Menu operation versus key operation Main menu description Main menu description Entering data Operation on the DisplaySelecting options Summary of menu operation Economy Mode Operational Status Icons Plot Mode Displays Plot display when cursor is on+36 44.257’ N 140.50 35.92NM 134 40.719’ E Plot display when cursor is off 36 44.257’ N Setting the Time and Date 22 Initial Settings menu Track Stopping Track Recording340.5 Track Color Changing Color, Appearance of Specific TrackPress MENU, 9 and 1 to display the EDIT/TRACK Mark menu EDIT/TRACK Mark menu Deleting specific track with cursor, box cursor Deleting TrackDeleting track by color Press MENU, 9, 1 to display the EDIT/TRACK menu Deleting all track Delete Track display Plot interval and track reconstruction Track Plotting IntervalHow the track is drawn Plot interval by time or distance Setting plot interval 1 by time Setting plot interval 2 to time Turning off track display when track is not being recorded Connecting track after restarting track recordingCustomizing the Hold Function Setup for manually entering plot interval Tuning off a plot intervalCustomizing the Plot Intvl Key Page Entering marks with the cursor MARKS, LinesEntering Marks Entering marks at own ship’s position Changing Current Mark Color Press the Mark Color key to show the Change Mark Color menu Changing Shape, Color of Specific Marks Deleting all marks Deleting MarksDeleting specific marks Deleting marks with the cursor Lines External Event MarkTarget Mark Erasing an external event mark Entering a line Changing line colorDeleting lines Waypoints Waypoints Entering Waypoints Waypoint entry by L/L coordinatesPlace the data input cursor on waypoint Waypoint entry by cursor Waypoint entry at own ship’s position Waypoint entry by range and bearing Entering a Comment for a Waypoint Waypoint entry by navigation aid Turning Specific Waypoint Displays On/Off Deleting Waypoints Deleting waypoints by cursor Deleting waypoints through waypoint list Setting destination waypoint by cursorDestination Waypoint Deleting external waypoint Setting destination waypoint by waypoint number Setting destination waypoint by range and bearing When you set a destination waypoint 11 How a destination waypoint is shown on the display 134 20.524’ E Displaying range and bearing to destination waypoint36 34.000’ N Press the Plot key to display the Data Display Cancelling destination waypoint by key input Cancelling Destination WaypointCancelling destination waypoint through the menu Select Cancel from the Dest field Press the ENT key Route Navigation Sample route Creating Routes Creating routes through the route list Creating routes with waypoint numbers Menu key Creating routes with waypoint numbers Route keyPress the Route key to display the Route NO. menu Creating routes with the cursor Select WPT no Enter waypoint numbers Press the ENT keyPress the Route to display the Route NO. menu Following a Route About route navigation Example of when to deselect waypoints Temporarily Deselecting a Route Waypoint Deleting Route Waypoints Deleting specific route waypoints Cancelling Route Navigation Deleting all route waypoints Route Calculation 10 Route list Alarms Arrival Alarm, Anchor Watch AlarmArrival alarm Anchor watch alarm Alarm range of arrival alarm XTE Alarm, Border Alarm Border alarmXTE alarm Ship’s Speed Alarm Press ← twice When the Alarm Buzzer Sounds What alarm is sounding?Silencing the alarm buzzer Features Compares the features of the video pilot and plot displaysVideo Pilot Display Destination data Mark data 34 44.463’ N Comparison of plot and video pilot displays34 44.463’ 135 21.288’ E 44 N 135 21 E Navigation Data Display Features Available with Autopilot Connection Autopilot Data Autopilot Information on Plot Display Sample autopilot information on plot display Autopilot Information on Video Pilot Display 134 40.719’ E 10.0KTS Autopilot in Manual mode Autopilot in Auto mode Autopilot in NAV mode Autopilot on, destination waypoint selected Memory Card Operations Formatting Memory CardsPress the 3 key to select Save Data to Memory Card Saving Data to Memory Cards Save Track display Playing Back Memory Cards File name example Playing back initial settings Saving, Playing Back Initial SettingsSaving initial settings Press the 5 key to select Display Memory Card Deleting files Editing Memory CardsDeleting track, marks/lines from a memory card Adding track, marks/lines GPS receiver status GPS Receiver Operation GP-3300GPS Information on the Navigation Data Display 10-1 Satellite schedule Frequency deviation10-2 GPS and Dgps Initial Settings Satellite data10-3 GPS initial settings menu description Describes the GPS Initial Settings menu10-4 Satellite Force Health/Deselection 10-5Press Menu and 8, and then press − to set the cursor on Latitude and longitude GPS smoothing GPS SmoothingSpeed and course GPS smoothing 10-6 Setting GPS smoothing 10-7 Cold Start 10-8 Correcting GPS Position Selecting chart systemGeodetic Datum 10-9 Displaying position in Loran a TDs Other FunctionsDisplaying Position in Loran TDs 11-1 Bearing Display Reference Displaying position in Loran C TDs11-2 Magnetic Deviation Displaying true bearing11-3 Changing Chart Appearance 11-4 Correcting Chart Position Correcting chart position by cursor11-5 Correcting chart position by latitude and longitude Corrections chart position by Δ Delta L/L11-6 Cancelling chart position correction Loran TD Correction11-7 Calculating R/B Between Two Points Calculating R/B by latitude and longitude11-8 Calculating R/B by waypoint numbers 11-9 Default memory arrangement is as shown in Figure Locking Preferred SettingsLocking or unlocking preferred settings Memory Capacity When the track memory becomes full oldest track is deleted Track memory11-11 Mark/line memory When the mark memory becomes full no marks can be enteredApportioning the Memory 11-12 Reading Number of Track, Marks Used 11-13 Smoothing 11-14 Selecting Navaid 11-15 Track, Mark and Marker Attributes 11-16 Initial settings menu Special menu11-17 Customizable items on the Initial Settings menu 11-18 Chart Symbols, Contour Lines Attributes 11-19Select item and option as appropriate Press the ENT key Maintenance & Troubleshooting Preventive Maintenance12-1 Memory circuits, I/O ports Diagnostic TestsSelf test at power on 12-2 Keyboard test 12-3To escape from the test, press any key 12-4 Test pattern 1 color dropoutTest pattern 2 color distortion Check the pattern for color dropout Press any key to escape Error Messages 12-5 No file by that name exists 12-6Memory card replaced during operation No files on memory card to delete Replacement of Fuse 12-7Waypoint being used as destination waypoint Replacement of Batteries Memory card battery12-8 GPS section GP-3300 Verifying Program Version NoPlotter section 12-9 Troubleshooting Table 12-10 12-11 Clearing Memories 12-12 12-13 Press the 8 key to select Clear Memory Appendix Time Differences Geodetic Chart List Adindan Specifications of Color Video PLOTTER/COLOR GPS Plotter GD/GP-3300 Coating Color Index Index-1 Index-2 Index-3