Furuno GD-3300, GP-3300 manual Destination Waypoint, Deleting waypoints through waypoint list

Deleting waypoints through waypoint list

1.Press the [MENU] key followed by the [1] key to display the WAYPOINT list.

2.Select the waypoint you want to delete.

3.Press the [CLR] key.

4.To delete another waypoint, repeat steps 2 and 3.

5.Press the [ENT] key.

Deleting external waypoint (99)

1.Cancel destination waypoint on connected navigation aid.

2.Display the cursor and operate the trackball to place the cursor on waypoint 99.

3.Press the [CLR] key.

4.5Destination Waypoint

By setting a destination waypoint, you can find the range and bearing from your vessel to a latitude and longitude position. You can set a destination waypoint by cursor, waypoint number, range and bear- ing, and route number. (Route number is a special method so it is dealt with in a later section.)

Setting destination waypoint by cursor

1.Press the [FR/TO] key to display the DESTINATION SETTING menu.

DESTINATION SETTING

DEST	=	SET	CANCEL
MODE	=	CURSOR		WAYPOINT ROUTE R/B

SELECT DESTINATION BY USING CURSOR AND PRESS ENT.

INTERMEDIATE POINTS CAN BE SET BY USING + KEY.

Figure 4-9 DESTINATION SETTING menu

2. Select CURSOR from the MODE field.

4-8