3. SETTING AND ADJUSTMENT

After installing the equipment, set up the own ship’s static information (MMSI, IMO number, ship’s name, call sign, type of ship and GPS antenna position). Also, set up the I/O ports.

3.1 Setting MMSI, IMO No., Name and Call Sign

1. Press the [MENU] key to open the main menu.

[MENU]

MSG

SENSOR STATUS

INTERNAL GPS

USER SETTINGS

INITIAL SETTINGS

CHANNEL SETTINGS

DIAGNOSTICS

2.Press ▼ on the cursor pad to choose INITIAL SETTINGS and press the [ENT] key. The following password entry window appears.

[ENTER PASSWORD]

Password entry window

3.Enter the password. The INITIAL SETTINGS window appears. Note that the password is known by only the FURUNO dealer.

[INITIAL SETTINGS] SET MMSI

SET INT ANT POS. SET EXT ANT POS. SET SHIP TYPE SET I/O PORT

QUIT [MENU]

Note that if the password is wrong, “VIEW” is displayed in stead of “SET” in the figure above.

18

Page 24
Image 24
Furuno FA-150 installation manual Setting and Adjustment, Setting MMSI, IMO No., Name and Call Sign