4.Press the [ENT] key, enter sub net mask in the SUB NET MASK field and press the [ENT] key. (Setting range: 000.000.000.000 to 255.255.255.255)
5.Press the [ENT] key, enter port number in the NAVNET PORT NO. field and press the [ENT] key. (Setting range: 10000 to 30000)
6.Press▼ to show next page.
[SET LAN PORT] | 2/2 |
GATEWAY ADDRESS |
|
000.000. 000. 000
HOST NAME : AISO
AISOUTPUT : CONTINUOUS
GPSOUTPUT : AUTO
ZDAOUTPUT : AUTO
7.Press the [ENT] key, enter gateway address in the GATEWAY ADDRESS field and press the [ENT] key. (Setting range: 000.000.000.000 to 255.255.255.255)
8.At the HOST NAME field, enter host name that is used in the NAVNET 3D(Setting range: AIS 0 to AIS 9) .
9.At the AIS OUTPUT field, set output condition.
AUTO:
CONTINUOUS: AIS Output AIS data continuously.
10.At the GPS OUTPUT field, set GPS data (L/L, SOF, COG) output condition between AUTO and CONTINUOUS.
11.At the ZDA OUTPUT field, set time data output condition between AUTO and
CONTINUOUS.
12.Press the [MENU] key several times to save the settings and close the menu.
27
