Patton electronic 1082/144 Switches S2-1 19.2 kbps or 144* kbps Synchronous Rate Enable, S2-2

Switches S2-1: 19.2 kbps or 144* kbps Synchronous Rate Enable

Use switch S2-1 to allow the Model 1082 and Model 1082/144 to operate at the 19.2 kbps synchronous data rate, or to enable the Model 1082/144 to operate at the 144* kbps synchronous data rate.

S2-1	Activation	Description
Off	Disabled	Synchronous data rate is 32–128kbps as
		defined by switches S1-1 and S1-2
On	Enabled	Model 1082 operates at synchronous 19.2 kbps
		data rate (see note).The Model 1082/144 operates
		at 144 kbps synchronous data rate (see note)

Note To operate at 19.2 kbps or 144 kbps, set switches S1-1 and S1-2 to the OFF position and switch S2-1 to ON (see section “Configur- ing DIP Switch S1” on page 9).

Switch S2-2: Front Panel Switch Disable

Use switch S2-2 to enable or disable the front panel toggle switches.

S2-2	Setting
On	Disable the front panel switches
Off	Enable the front panel switches

Switches S2-3: Response to Local Line Loop Requests from DTE

Use switch S2-3 to enable Local Line Loopback from the local DTE inter- face (See “Local Line Loopback (LLB)” on page 22).

S2-3	Activation	Description
Off	Disabled	Ignore Line Loop Back request from DTE interface
ON	Enabled	Respond to Line Loop Back request from DTE
		interface

Switches S2-4 and S2-5: Not Assigned

*144 kbps data rate is only available on the Model 1082/144.

19.2 kbps rate is available on all Model 1082 series modems except for the 1082/144.

13