Patton electronic 1082 Table Of Contents, Warranty Information, General Information, Installation

	TABLE OF CONTENTS
1.0	Warranty Information	4
1.1	FCC Information	4
1.2	CE Notice	4
1.3	Service	5
2.0	General Information	6
2.1	Features	6
2.2	Description	6
2.3	1082 SNMP Management Solutions	7
	HTTP/HTML Management	7
3.0	Configuration	8
3.1	Configuring the Hardware DIP Switches	8
	Configuring DIP Switch S1	9
	Switches S1-1 and S1-2: Data Rate	10
	Switch S1-3: Data Set Ready during Line Loopback Test	10
	Switch S1-4: Must be set to the ON position (Reserved)	11
	Switch S1-5: Asynchronous/Sync Operation	11
	Switches S1-6 and S1-7: System Clock Mode	11
	Switch S1-8: Response to RDL Request	11
	Configuring DIP switch S2	12
	Switches S2-1: 19.2 kbps or 144 kbps Synchronous
	Rate Enable	13
	Switch S2-2: Front Panel Switch Disable	13
	Switches S2-3: Response to Local Line Loop
	Requests from DTE	13
	Switches S2-4 and S2-5: Not Assigned	13
	Switch S2-6: Response to RDL Request from DTE	14
	Switch S2-7: Compatability Mode	14
	Switch S2-8: Not Assigned	14
4.0	Installation	15
4.1	Connecting the Twisted Pair Interface	15
4.2	Connecting the Model 1082 (V.35) Serial Interface	16
	Connecting the Model 1082 (V.35) to a DTE Device	16
	Connecting the Model 1082 (V.35) to a DCE Device	16
4.3	Connecting the Model 1082 (X.21) Serial Interface	17
	Connecting the Model 1082 (X.21) to a “DCE” or
	“DTE” Device	17
	Opening the Case	18
4.4	Connecting Power	19
	Universal AC Power (100–240VAC)	19
	DC Power	20
5.0	Operation	21
5.1	Power-up	21
5.2	LED Status Monitors	21
5.3	Test Modes	22

2