Patton electronic 1082 Switch S2-6 Response to RDL Request from DTE, S2-7, S2-3, Activation

Switch S2-6: Response to RDL Request from DTE

Use switch S2-6 to determine the Model 1082 response to RDL requests from the local DTE. In the enabled setting, the 1082 responds to RDL requests from the local DTE by sending an RDL loop request to the remote Model 1082 (See “Remote Digital Loopback (RDL)” on page 23).

S2-3	Activation	Description
Off	Disabled	Ignore Remote Digital Loopback request from
		DTE interface
On	Enabled	Respond to Remote Digital Loopback request
		from DTE interface

Switch S2-7: Compatability Mode

In some instances, you may need to connect a Model 1082 to a third party IDSL modem. By enabling S2-7 the 1082 will negotiate and link up to a non-Patton IDSL Modem. When using two Patton units, set 2-7 to the default position.

S2-7	Activation	Setting
Off	Disabled	Default position
On	Enabled	Compatibility Mode

Switch S2-8: Not Assigned

14