iHome IH24 Using the iH24, Connect iH24 to Power Source, Setting the Clock, Using the Alarm, iPod

Models: IH24

1 13
Download 13 pages 15.83 Kb
Page 5
Image 5
Using the iH24

Using the iH24

Connect iH24 to Power Source

a)Plug the AC adaptor cable into the AC Adaptor Jack and the other end into a standard 120v wall socket. Adaptor must be plugged in to charge iPod.

b)For portable operation, install 4 “AA” (LR) batteries in battery compartment on the bottom of of the unit. Make sure polarity matches diagram in compartments. Note: Unit will not charge iPod while operating on batteries.

Setting the Clock

a)Depending on your location and the time of year, move the DST (Daylight Saving Time) switch on the back of the unit to +1 to add one hour (a DST iconConnect iH24 to Power Sourcewill appear on the display) or to -1 to subtract 1 hour.

b)Press and hold the Time Set Button Setting the Clockuntil the display flashes. Press the Alarm Set Button to toggle between 24 hour (military) and 12 hour (standard) time display modes.

c)Press the Hour Set Button to adjust the hour display (a PM indicator appears when time is set to PM; there is no AM indicator)

d)Press the Minute Set Button to adjust the minute display. Hold to advance rapidly. When the correct time is displayed, press the Time Set buttonUsing the Alarmagain. Two beeps will indicate clock setting is complete.

Using the Alarm

Setting the Alarm

a)Press and hold the Alarm Set ButtonSetting the Alarmuntil the alarm time flashes to wake to iPod (buzzer alarm sounds if no iPod is detected).

b)Press the Hour Set Button to set the desired alarm hour (a PM indicator appears when time is set to PM; there is no AM indicator)

c)Press the Minute Set Button to set the alarm minute time. When the desired alarm time is displayed, press the Alarm Set ButtonArming and Disarming Alarm (Turn Alarm Function ON and OFF) again. Two beeps will indicate alarm setting is complete. Alarm is now armed, indicated by the alarm clock icon.

Arming and Disarming Alarm (Turn Alarm Function ON and OFF)

a)Press the Alarm On/Off Button to arm or disarm alarm functions. When armed, the alarm icon appears in the display.

Resetting the Alarm to Come on the Next Day

a)When the alarm is sounding, press the Alarm Reset/Power Off Button to stop the alarm and reset it to come on the following day.

Snooze

a)Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again 9 minutes later. Snooze can be pressed several times during the 1 hour alarm cycle.

Sure Alarm

The iH24 has a sure alarm feature so the buzzer alarm will still sound in the event of power failure, if backup battery is installed.

iPod

Playing and charging your iPod

a)After selecting and placing the proper insert for your iPod model, gently dock iPod in Dock. When docked, iPod will charge until fully charged when the iH24 is connected to an outlet with AC adaptor. Unit will not overcharge iPod.

b)Press the iPod Play ButtonResetting the Alarm to Come on the Next Dayto play iPod, and again to pause.

c)Press Volume UP or DOWN buttons to adjust iH24 volume up or down.

e)Press Alarm Reset/Power Off Button to turn iH24 and iPod off.

3

Page 5
Image 5
iHome IH24 Using the iH24, Connect iH24 to Power Source, Setting the Clock, Using the Alarm, iPod, Setting the Alarm