iHome IH24 IB Using Sleep Mode, Using the Aux in Jack, Using Dimmer, Using the Travel Lock

Models: IH24

1 13
Download 13 pages 15.83 Kb
Page 6
Image 6
Using Sleep Mode

Using the iH24

Using Sleep Mode

Press the Sleep Button while the iPod is playing to enter sleep mode, and continue to press to step through the available sleep

times: 90, 60, 30 or 15 minutes. The sleep mode icon will appear on the display. The iH24 will play for the number of minutes set, growing gradually softer until shutting off both the unit and the iPod at the set time. Press the Volume Up Using the Aux in Jack or Down controls to set your own sleep volume. Sleep volume setting is separate from your alarm or regular listening volume selection.

Using the Aux in Jack

Use an audio patch cord (available at www.ihomeaudio.com) to play nondocking iPod models or other audio devices through the iH24 Aux in Jack (one end in the device’s line out or headphones jack, the other in the iH24 Aux in jack). Make

sure there is no iPod docked in the iH24 when using the Aux in jack. Press the Using Dimmer iPod Play Button.

Using Dimmer

Press the Snooze/Dimmer Button during normal operation to adjust the brightness of LCD display. While operating on AC current, the switch will toggle between high, medium, low and off settings. In battery mode, the display is off by default. Press once to activate the display for about 3 seconds.

Using the Travel Lock

You can disable the iH24 controls to avoid turning on the device or changing settings while in transit and to save battery life

during extended periods of non-use. To do so, move the Travel Lock Switch

(located on the back of the unit) to the Locked

icon position. A Lock Icon

will appear on the display indicating the unit is locked and controls are inactive. Move the switch

to the Remote positon to restore normal function with remote control capability, or to the Off position to restore function with the remote disabled.

Using the EXB Button

Press the EXB ButtonUsing the Travel LockUsing the EXB ButtonManual background located on the back panel of the unit to enable the EXB sound enhancement circuitry. This circuitry is designed to provide a broader audio image with enhanced low range and mid range sound reproduction to bring

added life to compressed MP3 files. The EXB icon

will appear in the display when EXB is active. Press button again to

disable the EXB effect.

 

4

Page 6
Image 6
iHome IH24 IB warranty Using Sleep Mode, Using the Aux in Jack, Using Dimmer, Using the Travel Lock, Using the EXB Button