Furuno GD-3300, GP-3300 2.7 Customizing the PLOT INTVL Key

2-9
2.7 Customizing the PLOT INTVL Key
Each time you press the [PLOT INTVL] key, in the default setting, a
plot interval is selected (plot interval 1 or plot interval 2) or recording
of the track is turned off. If you do not need one of the plot intervals
or you would like to reserve one of them for manual entry of plot
interval, do the following:
Setup for manually entering plot interval
To enable manual entry of plot interval by the [PLOT INTVL] key;
1. Press the [MENU] key.
2. Press the [8] key to select INITIAL SETTINGS.
3. Select PLOT INTERVAL 1 or PLOT INTERVAL 2, whichever
you want to use to manually enter plot interval.
4. Select TIME or DISTance.
5. Press the [CLR] key followed by the [ENT] key. Then, to manu-
ally enter plot interval, press the [PLOT INTVL] to select PLOT
INTERVAL chosen in step 3, enter plot interval, then press the
[ENT] key.
PLOT INTERVAL SETTING BY DISTANCE
PLOT INTERVAL = − − MIN − − SEC
Figure 2-14 PLOT INTERVAL menu
Tuning off a plot interval
To turn off a plot interval;
1. Press the [MENU] key.
2. Press the [8] key to select INITIAL SETTINGS.
3. Select PLOT INTERVAL 1 or PLOT INTERVAL 2, whichever
you want to turn off.