Getting Started
How to Install the AC Adapter
1 Connect the AC adapter cable plug into the speaker system’s power jack.
The jack is located on the back of the system and labeled POWER.
2 Plug the AC adapter into a wall outlet.
How to Install the Wireless Remote Battery
The wireless remote battery (included) is not installed at the factory. To install the battery, follow these steps:
1Open the battery compartment door.
The battery compartment door is located on the back end of the remote. Simply slide the door in the direction of the arrow until it clicks, and then swing the door open.
2 Position the battery (included) so it sits in the battery holder correctly.
Make sure the polarity (the + and
–sides of the battery) is correct as illustrated on the inside of the door.
3Close the battery compartment door
Swing the door shut, and then slide it in the opposite direction of the arrow until it clicks.
NOTE Please discard used batteries properly.
4
