Listening to the FM Radio
1Plug the FM radio antenna into the speaker system’s FM ANTENNA jack.
The jack is located on the back of the system.
2Extend the FM antenna wire fully for best FM reception. Also, do not strip, alter or attach to other antennas.
3Ensure your speaker system is powered on.
If the system isn’t on, press the STANDBY button on the speaker system or the 
button on the wireless remote.
4Select “FM” mode.
Press the SOURCE button on your speaker system or the SOURCE button on the wireless remote until the FM appears on the LCD.
5Tune to the station you want to listen to.
Use the 
and 
buttons on the wireless remote to tune in the desired station.
Press and hold these same buttons for 3 seconds to find the next clear FM station. Press and hold the AUTO button on the wireless remote for 3 seconds to automatically tune and save all clear FM stations.
6Adjust the volume.
Use the VOLUME + and – VOLUME buttons on the Altec Lansing Moondance Home speaker system to adjust the system volume. Or, use the VOLUME + and – VOLUME buttons on the wireless remote.
NOTE Extend the FM antenna wire fully for best FM reception. Also, do not strip, alter or attach to other antennas.
How to Store Preset Stations
Your Altec Lansing Moondance Home speaker system’s wireless remote enables you to program up to 16 FM station presets:
1Ensure your speaker system is powered on.
2Make sure you are in “FM” mode.
3Tune to the station you wish to store.
4Store the station.
Press the ENTER button on the wireless remote. A preset location will show and begin to flash. The station stored in that preset will be displayed in the lower
Use the VOLUME + and – VOLUME buttons on the wireless remote to select the preset location you want to store the station in.
Press the ENTER button to store the station in the preset location. You can store one FM station in each preset location.
5To store other preset stations, repeat the above steps.
How to Recall Preset Stations
1Ensure your speaker system is powered on.
2Make sure you are in “FM” mode.
3Use the 
and 
buttons on the wireless remote to select the desired preset.
The radio will tune to your preset station.
4Adjust the volume.
12
