Your Altec Lansing speaker system has two separate alarms.
How to Set Alarm 1
1Ensure your speaker system is powered on.
If the system isn’t on, press the STANDBY button on the speaker system or the 
button on the wireless remote.
2Press and hold the ALARM1 button for 3 seconds.
This puts you in the Alarm Set mode for alarm 1.
3Adjust the hour.
Use the 
and 
buttons on your speaker system or the
VOLUME + and – VOLUME buttons on the wireless remote to adjust the hour setting. Be sure to take note of the AM/PM setting if you selected
Set mode.
4Adjust the minute.
Use the 
and 
buttons on your speaker system or the
VOLUME + and – VOLUME buttons on the wireless remote to adjust the minute setting. Then press the ALARM1 button to save this setting and enter the Alarm Volume mode.
5Set the alarm volume.
Use the 
and 
buttons on your speaker system or the
Setting the Alarm
VOLUME + and – VOLUME buttons on the wireless remote to set the alarm volume. Then press the ALARM1 button to save this setting and enter the Alarm Source mode.
6Set the alarm source.
Use the 
and 
buttons on your speaker system or the
VOLUME + and – VOLUME buttons on the wireless remote to select the alarm source: iPod, FM or AUX. Then press the ALARM1 button to save this setting and enter the Alarm Daily Frequency mode.
NOTE If you wish to wake up to a specific song on your iPod, dock your iPod on the speaker system, select the song on your iPod, and then select “iPod” as your alarm source. If you have selected “FM” as your alarm source, the alarm will play the last radio station selected.
7Select the alarm daily frequency.
Use the 
and 
buttons on your speaker system or the
VOLUME + and – VOLUME buttons on the wireless remote to select the alarm daily frequency (F):
•Choose
•Choose
•Choose
•Choose F1 to have the alarm go off only once at the next selected time.
15
