Furuno GP-3300, GD-3300 manual Creating routes with waypoint numbers Menu key

Creating routes with waypoint numbers: MENU key

1.Press the [MENU] key.

2.Press the [2] key to display the ROUTE list.

2 ROUTE					ROUTE NO	1
WAYPOINT				LATITUDE LONGITUDE		DISTANCE	TTG
1	(2 8) 3 4 ° 4 5.1 4 6’ N 1 3 5° 2 1.2 1 7 E− − − . − − NM						− − − − − . − H
2	(	−	−) − − ° − −.− − −’		N − − −° − −.− − −’ E − − − . − − NM − − − − − . − H
3	(− −) − − ° − −.− − −’				N − − −° − −.− − −’ E − − − . − − NM − − − − − . − H

Figure 5-3 ROUTE list

3.Press [←] twice.

4.Enter first waypoint number of route in two digits. If it is 08, for example, press [0] and [8]. The L/L position of the waypoint ap- pears.

5.Press [↓] followed by [←] twice to send the data input cursor to the next line. Enter waypoint number. Its L/L position appears.

6.Repeat step 6 to enter another waypoint.

7.To enter another route, press the [] key to scroll page.

8.After entering all information, press the [ENT] key.

Creating routes with waypoint numbers: ROUTE key

1. Press the [ROUTE] key to display the ROUTE NO. menu.

ROUTE NO.
MODE	= CURSOR	WAYPOINT	??? LIST
ROUTE NO. = − −
WPT NO.	= 0 0 + − − + − − + − − + − − + − − + − − + −

+ − − + − − + − − + − − + − − + − − + − − + − −

ENTER ROUTE NO., AND WAYPOINT NO.

PRESS ENT TO REGISTER.

Figure 5-4 ROUTE NO. menu

2.Select WAYPOINT from the MODE field.

3.Select ROUTE NO.

4.Enter route number in two digits. If the route number is 01, for example, press [0] and [1].

5-3