36 34.000’ N, 134 20.524’ E | Furuno GP-3300, GD-3300 specs

Displaying range and bearing to destination waypoint

Press the [PLOT] key to display the DATA DISPLAY (2).

Bearing to destination


36° 34.000’ N	176.5°	14.5NM
134° 20.524’ E	340.5°	2D	1.2
		0’	10"

Heading

PLOT

DATA DISPLAY (2)

DATA DISPLAY (1)	36° 34.000’ N	340.5°	176.5°
DATA DISPLAY (1)	134° 20.524’ E	10.0KTS	0.215NM
	134° 20.524’ E	10.0KTS	2D	1.2
			0’	10"
	40	42

Range to destination Waypoint

Bearing to destination waypoint

Figure 4-12 Location of destination waypoint information

4-11

Page 58

Image 58

Furuno GP-3300, GD-3300 manual Displaying range and bearing to destination waypoint, 36 34.000’ N, 134 20.524’ E

Contents

Page 00080834300 Safety Instructions About the TFT LCD Furuno agent or dealer Table of Contents External Event Mark Target Mark Lines Video Pilot Display Navigation Data Display Time Differences Geodetic Chart List Chart Symbols, Contour Lines Attributes12.1 Preventive Maintenance 12-1 12.2 11.9 Memory Capacity Foreword Word to Furuno GD-3300/GP-3300 Owners Features Vii Menu Tree Viii System Configuration GPS Antenna Unit GPA-017S Operational Overview Control Description Inserting Chart Cards Control description Turning the Power On/Off Turning the power on Cursor TrackballTurning the cursor on/off Cursor information Shifting the DisplayReturning Own Ship Marker to Screen Center +36 44.257’ N How to select screen center Selecting Screen Center by Cursor Position Chart Scale Display Brilliance and Key Backlighting Insert chart card label side up in the lower slot Card Drives, Chart CardsDisplaying an electronic chart with the power turned on Card drives Care and handling of the cards Ejecting the chart cardChart card troubleshooting Press the eject button Furuno chart symbols Chart iconsTable below shows Furuno chart symbols and their meanings Comparison of FURUNO, Navionics chart cards Buoy, lighthouse data display on Navionics charts Data shown when cursor is on Data Window Video pilot mode description Data shown when cursor is offPlot mode description Nav data mode description Menu Operation Menu operation versus key operation Main menu description Main menu description Entering data Operation on the DisplaySelecting options Summary of menu operation Economy Mode Operational Status Icons Plot display when cursor is on Plot Mode Displays+36 44.257’ N 140.50 35.92NM 134 40.719’ E Plot display when cursor is off 36 44.257’ N Setting the Time and Date 22 Initial Settings menu Stopping Track Recording Track340.5 Changing Color, Appearance of Specific Track Track ColorPress MENU, 9 and 1 to display the EDIT/TRACK Mark menu EDIT/TRACK Mark menu Deleting specific track with cursor, box cursor Deleting TrackDeleting track by color Press MENU, 9, 1 to display the EDIT/TRACK menu Deleting all track Delete Track display Plot interval and track reconstruction Track Plotting IntervalHow the track is drawn Plot interval by time or distance Setting plot interval 1 by time Setting plot interval 2 to time Connecting track after restarting track recording Turning off track display when track is not being recordedCustomizing the Hold Function Tuning off a plot interval Setup for manually entering plot intervalCustomizing the Plot Intvl Key Page Entering marks with the cursor MARKS, LinesEntering Marks Entering marks at own ship’s position Changing Current Mark Color Press the Mark Color key to show the Change Mark Color menu Changing Shape, Color of Specific Marks Deleting all marks Deleting MarksDeleting specific marks Deleting marks with the cursor Lines External Event MarkTarget Mark Erasing an external event mark Changing line color Entering a lineDeleting lines Waypoints Waypoints Waypoint entry by L/L coordinates Entering WaypointsPlace the data input cursor on waypoint Waypoint entry by cursor Waypoint entry at own ship’s position Waypoint entry by range and bearing Entering a Comment for a Waypoint Waypoint entry by navigation aid Turning Specific Waypoint Displays On/Off Deleting Waypoints Deleting waypoints by cursor Deleting waypoints through waypoint list Setting destination waypoint by cursorDestination Waypoint Deleting external waypoint Setting destination waypoint by waypoint number Setting destination waypoint by range and bearing When you set a destination waypoint 11 How a destination waypoint is shown on the display 134 20.524’ E Displaying range and bearing to destination waypoint36 34.000’ N Press the Plot key to display the Data Display Cancelling destination waypoint by key input Cancelling Destination WaypointCancelling destination waypoint through the menu Select Cancel from the Dest field Press the ENT key Route Navigation Sample route Creating Routes Creating routes through the route list Creating routes with waypoint numbers Route key Creating routes with waypoint numbers Menu keyPress the Route key to display the Route NO. menu Select WPT no Enter waypoint numbers Press the ENT key Creating routes with the cursorPress the Route to display the Route NO. menu Following a Route About route navigation Example of when to deselect waypoints Temporarily Deselecting a Route Waypoint Deleting Route Waypoints Deleting specific route waypoints Cancelling Route Navigation Deleting all route waypoints Route Calculation 10 Route list Arrival Alarm, Anchor Watch Alarm AlarmsArrival alarm Anchor watch alarm Alarm range of arrival alarm Border alarm XTE Alarm, Border AlarmXTE alarm Ship’s Speed Alarm Press ← twice What alarm is sounding? When the Alarm Buzzer SoundsSilencing the alarm buzzer Compares the features of the video pilot and plot displays FeaturesVideo Pilot Display Destination data Mark data 34 44.463’ N Comparison of plot and video pilot displays34 44.463’ 135 21.288’ E 44 N 135 21 E Navigation Data Display Features Available with Autopilot Connection Autopilot Data Autopilot Information on Plot Display Sample autopilot information on plot display Autopilot Information on Video Pilot Display 134 40.719’ E 10.0KTS Autopilot in Manual mode Autopilot in Auto mode Autopilot in NAV mode Autopilot on, destination waypoint selected Formatting Memory Cards Memory Card OperationsPress the 3 key to select Save Data to Memory Card Saving Data to Memory Cards Save Track display Playing Back Memory Cards File name example Playing back initial settings Saving, Playing Back Initial SettingsSaving initial settings Press the 5 key to select Display Memory Card Deleting files Editing Memory CardsDeleting track, marks/lines from a memory card Adding track, marks/lines GPS receiver status GPS Receiver Operation GP-3300GPS Information on the Navigation Data Display 10-1 Frequency deviation Satellite schedule10-2 Satellite data GPS and Dgps Initial Settings10-3 Describes the GPS Initial Settings menu GPS initial settings menu description10-4 10-5 Satellite Force Health/DeselectionPress Menu and 8, and then press − to set the cursor on Latitude and longitude GPS smoothing GPS SmoothingSpeed and course GPS smoothing 10-6 Setting GPS smoothing 10-7 Cold Start 10-8 Correcting GPS Position Selecting chart systemGeodetic Datum 10-9 Displaying position in Loran a TDs Other FunctionsDisplaying Position in Loran TDs 11-1 Displaying position in Loran C TDs Bearing Display Reference11-2 Displaying true bearing Magnetic Deviation11-3 Changing Chart Appearance 11-4 Correcting chart position by cursor Correcting Chart Position11-5 Corrections chart position by Δ Delta L/L Correcting chart position by latitude and longitude11-6 Loran TD Correction Cancelling chart position correction11-7 Calculating R/B by latitude and longitude Calculating R/B Between Two Points11-8 Calculating R/B by waypoint numbers 11-9 Default memory arrangement is as shown in Figure Locking Preferred SettingsLocking or unlocking preferred settings Memory Capacity Track memory When the track memory becomes full oldest track is deleted11-11 Mark/line memory When the mark memory becomes full no marks can be enteredApportioning the Memory 11-12 Reading Number of Track, Marks Used 11-13 Smoothing 11-14 Selecting Navaid 11-15 Track, Mark and Marker Attributes 11-16 Special menu Initial settings menu11-17 Customizable items on the Initial Settings menu 11-18 11-19 Chart Symbols, Contour Lines AttributesSelect item and option as appropriate Press the ENT key Preventive Maintenance Maintenance & Troubleshooting12-1 Memory circuits, I/O ports Diagnostic TestsSelf test at power on 12-2 12-3 Keyboard testTo escape from the test, press any key 12-4 Test pattern 1 color dropoutTest pattern 2 color distortion Check the pattern for color dropout Press any key to escape Error Messages 12-5 No file by that name exists 12-6Memory card replaced during operation No files on memory card to delete 12-7 Replacement of FuseWaypoint being used as destination waypoint Memory card battery Replacement of Batteries12-8 GPS section GP-3300 Verifying Program Version NoPlotter section 12-9 Troubleshooting Table 12-10 12-11 Clearing Memories 12-12 12-13 Press the 8 key to select Clear Memory Appendix Time Differences Geodetic Chart List Adindan Specifications of Color Video PLOTTER/COLOR GPS Plotter GD/GP-3300 Coating Color Index Index-1 Index-2 Index-3

Furuno GP-3300 Displaying range and bearing to destination waypoint, 36 34.000’ N, 134 20.524’ E

Models: GP-3300 GD-3300

Displaying range and bearing to destination waypoint

Press the [PLOT] key to display the DATA DISPLAY (2).

36° 34.000’ N

14.5NM

134° 20.524’ E

Figure 4-12 Location of destination waypoint information