Furuno GD-3300 Creating routes with the cursor, Press the Route to display the Route NO. menu

5.Select WPT NO.

6.Enter waypoint numbers.

7.Press the [ENT] key.

Creating routes with the cursor

1. Press the [ROUTE] to display the ROUTE NO. menu.

ROUTE NO.
MODE	= CURSOR WAYPOINT ??? LIST

ROUTE NO. = −

ENTER ROUTE NO., AND SELECT WAYPOINTS,

PRESSING + KEY AFTER SELECTIONS.

PRESS ENT TO REGISTER.

Figure 5-5 ROUTE NO. menu

2.Enter route number in two digits. (Don’t press the [ENT] key yet.)

3.Operate the trackball to place the cursor on L/L position desired for first route waypoint.

4.Press [+]. If you want to cancel a point, press [-].

5.Repeat steps 3 and 4 to enter other points.

6.Press the [ENT] key. Route waypoints entered by the cursor are marked with a yellow flag and connected with a green dashed line.

5-4