Furuno GD-3300, GP-3300 manual Setting GPS smoothing, 10-7

Setting GPS smoothing

The default GPS smoothing settings are suitable for most all condi- tions. If change of the default settings is necessary, do the following

1.Press [MENU] and [8], and then press [−] to set the cursor on PAGE CHANGE (TO GPS INITIAL SETTINGS). The follow- ing display appears.

GPS INITIAL SETTINGS

PAGE CHANGE (TO INITIAL SETTINGS)
POSITION FIXING MODE =		2D		3D	2D/3D
GEODETIC DATUM	=	WGS-84		WGS-72 TOKYO		NAD
		EURO		AUST	MISC	(007)
HDOP THRESHOLD	= 20 (2~99)
TIME DIFFERENCE	= 09:00
LATITUDE	= 34°		00.	000	N
LONGITUDE	= 135°		00.	000	E
DELTA LATITUDE	= 00.		000	N
DELTA LONGITUDE	= 00.		000	E
SMOOTHING	= 00~00			L/L-SPEED (0~99)
ANTENNA HEIGHT	= 030		M
COLD START	=	NO		YES
CST SATELLITE NO.	= 01
MIN. ELEVATION ANGLE	= 05° (5~9)
DESELECT SAT NO.	= — —

Figure 10-6 GPS INITIAL SETTINGS menu

2.Set the cursor on SMOOTHING.

3.Enter latitude and longitude smoothing time from 0 - 99 minutes in two digits.

4.Enter speed and course smoothing time from 0 - 99 seconds in two digits.

5.Press the [ENT] key.

10-7