Furuno GD-3300, GP-3300 11-6, Correcting chart position by latitude and longitude, Corrections chart position by (Delta) L/L

11-6
Correcting chart position by latitude and
longitude
You can correct chart position by manually entering latitude and lon-
gitude corrections.
1. Press the [MENU] key followed by the [6] key to display the
CORRECT POSITION screen.
6 CORRECT POSITION
POS CORR = YES NO
MODE = CURSOR L/L L/L
LATITUDE = − − ° − − . − − − ’N ( . ’N)
LONGITUDE = − − − ° − − . − − − ’E ( . ’E)
SET CORRECT L/L POSITION THROUGH KEYBOARD
AND PRESS ENT TO DISPLAY L/L.
PRESS ENT AGAIN TO REGISTER. + : N, E − : S, W
Figure 11-8 CORRECT POSITION menu
2. Select YES from the POS CORR field.
3. Select L/L from the MODE field.
4. Enter latitude and longitude corrections in the LATITUDE and
LONGITUDE fields.
5. Press the [ENT] key to display ∆ L/L.
6. Press the [ENT] key again to register.
Corrections chart position by ∆ (Delta) L/L
Follow the procedure below to correct chart position by Delta L/L.
1. Press the [MENU] key followed by the [6] key to display the
CORRECT POSITION screen.
6 CORRECT POSITION
POS CORR = YES NO
MODE = CURSOR L/L L/L
DELTA LAT = ��� − ° − − . − − − ’N
DELTA LONG= − − ° − − . − − − ’E
ENTER L/L CORRECTION VALUE THROUGH KEYBOARD.
+ : N, E − : S, W
Figure 11-9 CORRECT POSITION menu