Furuno GP-3300, GD-3300 manual Main menu description

Main menu description

Table 1-5 Main menu description

Menu	Menu	Function
No.
1	WAYPOINT	Registers waypoint by latitude and longitude; edits/deletes waypoint,
		displays waypoint list.
2	ROUTE	Displays route list.
3	SAVE DATA TO	Saves desired display component to memory card.
	MEMORY CARD	1. TRACK: Save track.
		2.	MARK/LINE: Save marks/lines.
		3.	WAYPOINT/ROUTE: Save waypoint/route.
		4.	INITIAL SETTINGS: Save initial settings.
		7.	DELETE MEMORY CARD DATA: Delete file on memory card.
		8. FORMAT MEMORY CARD: Prepare memory card for use with system.
		9.	SELECT CARD SLOT: Select memory card slot to use.
4	LOAD MEMORY	Loads memory card.
	CARD	1. TRACK: Loads track.
		2.	MARK/LINE: Loads marks/lines.
		3.	WAYPOINT/ROUTE: Loads waypoints/routes.
		4.	INITIAL SETTINGS: Load initial settings.
		9.	SELECT CARD SLOT: Selects memory card slot to use.
5	DISPLAY MEMORY	Plays back memory card. (Note that display is not cleared.)
	CARD
6	CORRECT POSITION	Corrects chart position error.
7	APPORTION/DELETE	Apportions deletes memory.
	MEMORY	1. APPORTION MEMORY: Apportions memory between track and marks.
			Total capacity for marks and track is 8,000 points.
		2.	DELETE TRACK: Deletes all track.
		3.	DELETE MARK: Deletes all marks.
8	INITIAL SETTINGS	Displays INITIAL SETTINGS menu.
9	MISC	1. EDIT TRACK/MARK: Edit, delete track/marks.
		2.	CALCULATE RANGE/BEARING: Calculates range and bearing
			between two points.
		6.	SPECIAL
			1)	TIME MARK: Turns time mark on or off.
			2)	EVENT MARK WINDOW: Turns mark infomation window on
				video pilot display on/off.
			3)	ROUTE LINE: Connects/disconnects route waypoints.
			4)	SCREEN SCALE: Selects chart scale for distance or scale.
			5)	AP DATA FORMAT: Selects autopilot data format.
		7.	SELECT MARKS/CONTOUR LINE: Selects color of chart marks
			and contours lines and turn them on/off.
		8. CLEAR MEMORY
			1)	CLEAR SCREEN DATA: Clears current display.
			2)	CLEAR ALL GD DATA: Clears GD data.
			3)	CLEAR GPS DATA: Clears GPS receiver data (GP-3300 only).
				only).
			4)	CLEAR ALL DATA: Clears both GD and GPS data (GP-3300
				only).
		9.	SELF TEST
			1)	MEMORY/I/O PORT: Checks memories and I/O ports.
			2)	KEYBOARD: Tests keyboard.
			3)	TEST PATTERN 1: Tests for color dropout.
			4)	TEST PATTERN 2: Tests for color destortion.

1-15