Furuno GD-3300, GP-3300 11-9, Calculating R/B by latitude and longitude, Calculating R/B by waypoint numbers

11-9
Calculating R/B by latitude and longitude
You can calculate the range and bearing between two points by using
the cursor to designate the two points.
1. Press [MENU], [9] and [2] to display the CALCULATE RANGE/
BEARING menu.
9-2 CALCULATE RANGE/BEARING
MODE = CURSOR L/L WAYPOINT
START PT: − − ° − − . − − − ’ N − − ° − − . − − − ’ E
STOP PT : − − ° − − . − − − ’ N − − ° − − . − − − ’ E
RANGE : − − − − . − − NM BEARING : − − − .− °
SELECT START AND STOP POINTS BY USING CURSOR,
PRESSING ENT AFTER EACH POINT.
PRESS CLR TO CALCULATE ANOTHER R/B.
Calculation
results
Figure 11-12 CALCULATE RANGE/BEARING menu
2. Select CURSOR from the MODE field.
3. Operate the trackball to select start point and then press ENT. A
green square marks start point.
4. Operate the trackball to select stop point and then press ENT. A
solid green line connects start and stop points and the calculation
results appear on the menu.
Calculating R/B by waypoint numbers
To find the range and bearing between two registered waypoints;
1. Press [MENU], [9] and [2] to display the CALCULATE RANGE/
BEARING menu.
9-2 CALCULATE RANGE/BEARING
MODE = CURSOR L/L WAYPOINT
START PT= − −
STOP PT = − −
RANGE : − − − − . − − NM BEARING : − − − .− °
ENTER START AND STOP WAYPOINT NUMBERS.
PRESS CLR TO CALCULATE ANOTHER R/B.
Calculation
results
Figure 11-13 CALCULATE RANGE/BEARING menu