Key Operator Setting

102

6

Printing the Personal Code List

Print this list to find out the registered
Personal Codes and their names.
AMake sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒If the standby display is not
shown, press the {Facsimile} key.
BPress the {
{{
{UserTools}
}}
} key.
CEnter the function number for
“Key Op. Settings” using the
number keys and press the {
{{
{#}
}}
}
key within 3 seconds.
Note
❒If “Key Op. Settings” is not
shown, press [↑
↑↑
↑Prev.] or [↓
↓↓
↓Next].
DEnter the function number for
“Personal Code” using the
number keys.
EEnter the function number for
“Print Pers. Code” using the
number keys.
FPress the {
{{
{Start}
}}
} key.
When printing is completed, the
display shown in step 4 appears
again.
Note
❒If you press [Cancel] before
printing starts, the printing
stops and the display shown in
step F appears again.
GPress [PrevMenu] twice.
HPress the {
{{
{UserTools}
}}
} key.
ECM
If a part of a transmission fails be-
cause of a line problem, the lost data
is automatically resent. For this fea-
ture to work, the other machine must
have ECM. By default, ECM is turned
on, but you can change this with the
following procedure.
Limitation
❒If you turn ECM off, you cannot
use the following features:
•JBIG Transmission
•Super G3 Communication
Us28-1.tif
Adjustment
User Tools
Program
Energy Saver
Clear Modes
Interrupt
Screen Contrast
LTWO120E.eps
Usfax-new062.tif
Us169-1.tif
Us169-2.tif