Savin C2824, C3528, C4535 manual Enter a Transfer Stations, Enter one or more End Receivers

Transfer Request

C Enter the “Transfer Request” func- tion number with the number keys.

Note

❒If the appropriate display is not shown, press [↑Prev.] or [↓Next].

D Enter a Transfer Stations and

press [Recv. Stn].

Note

❒Enter the fax numbers of the Transfer Stations with either Quick Dials, Speed Dials or the number keys.

❒If you make a mistake, press the {Clear/Stop} key and try again.

❒To cancel the Transfer Request, press [Cancel]. The Transmis- sion Mode menu is shown again.

E Enter one or more End Receivers.

Note

❒You cannot enter the numbers of the End Receivers directly. The numbers must be stored in Quick Dials, Speed Dials or Groups in the Transfer Sta- tion(s). To specify an End Re-

ceiver, use the special format described in. ⇒ P.54 “Specifying an End Receiver”

❒ Press [Add RcvStn] if you wish	3
enter more End Receivers.

❒Press the < or > key to see the End Receivers already entered. You can select an End Receiver

from this list and cancel it by pressing the {Clear/Stop} key.

❒To cancel the Transfer Request, press [Cancel].

F When you have specified all the End Receivers, press [OK].

G If you want to enter an additional Transfer Station, press [Yes] and repeat steps D to F.

If you press [No], the Transmission Mode menu is shown and a check mark is added to “Transfer Re- quest”.

53