Changing Key Operator Settings
101
6
DEnter the function number for
“Personal Code” using the
number keys.
EEnter the function number for
“Pers.Code Access” using the
number keys.
FSwitch access on or off using the
<
<<
< or >
>>
> key and then press [OK].
Note
❒If you press [Cancel], the previ-
ous setting is not changed and
the display shown in step E ap-
pears again.
GPress [PrevMenu] twice.
HPress the {
{{
{UserTools}
}}
} key.
The display returns to the Personal
Code screen.
Accessing the Personal Code
Access
The machine can be set up so that
nobody can use it without entering
a personal code. This prevents un-
authorized people from sending
fax messages and can be used to
track fax machine use by giving a
personal code to each user.
Note
❒You can store up to 20 personal
codes (If the optional Expansion
Memory is installed, you can
store up to 50 personal codes).
❒Register personal codes and
turn Personal Code Access on.
The default setting is off. P.100
“Personal Code Access”
❒Even if Restricted Access is ena-
bled, the machine can receive
and print a fax message.
AIf Personal Code Access is
turned on, the following dis-
play appears:
BEnter an 4-digit personal code
using the number keys, and
press [#
##
#].
Note
❒If a user enters a personal
code that is not registered,
the machine returns to step A.
Us169-1.tif
Us169-2.tif
Us172-3.tif
Us83-3.tif
Us28-1.tif