More Transmission Functions
11
1
More Transmission Functions

Auto Fax Reception Power-up

This machine can be set to shut down
automatically if nobody has used the
it for a while. In these situations, even
though the operation switch is off, the
machine can still receive incoming
messages as long as the Main Power
switch is on.
Important
❒Reception is not possible if both
the operation switch and Main
Power switch are turned off.
Note
❒By default, messages are printed as
soon as they are received (Immedi-
ate Reception). To change this, see
P.130 “Changing the User Parame-
ters”(Switch14, Bit0)

Dual Access

The machine can scan other messages
into memory even while sending a
fax message from memory, receiving
a message into memory , or automat-
ically printing a report. Since the ma-
chine starts sending the second
message immediately after the cur-
rent transmission terminates, the line
will be used efficiently.
Note that during Immediate Trans-
mission or when in User Tools mode,
the machine cannot scan an original.

Transmission with Image

Rotation

For most purposes, set A4/LT origi-
nals in the landscape direction (L). If
you set an A4/LT original in the por-
trait direction (K), the image will be
sent rotated by 90°. Providing the re-
ceiver has A4/LT landscape paper
(L), the message will be printed the
same size as the original.
Limitation
❒This feature is not available with
Parallel Memory Transmission or
Immediate Transmission.
❒When Image Rotation is used, all
messages are sent by normal Mem-
ory Transmission.