Printing a File Received with Memory Lock
69
4
Printing a File Received with Memory Lock
This is a security feature designed to
prevent unauthorized users from
reading your messages. If Memory
Lock is switched on, all received mes-
sages are stored in memory and are
not automatically printed. To print
the messages, you have to enter the
Memory Lock ID code. When your
machine has received a message with
Memory Lock, the Receive File indi-
cator blinks.
Preparation
Before you start, program your
Memory Lock ID.⇒ P.125 “ID
Code”
Note
❒Messages received by Polling Re-
ception are automatically printed
even if this feature is switched on.
❒If the Main Power switch is turned
off for more than an hour, all mes-
sages protected by Memory Lock
will be deleted. In that case, the
Power Failure Report will be print-
ed so you can confirm which mes-
sages have been deleted. ⇒ P.143
“When Power is Turned off or Fails”
❒You can also apply Memory Lock
to messages that come only from
certain senders. ⇒ P.115 “Treating
Message from Certain Senders Differ-
ently (Specified Senders)”
AMake sure that the Receive File
indicator blinks. Press [Info.].
The Information menu is shown.
BEnter the “Print Mem. Lock”
function number with the
number keys.
Note
❒If “Print Mem. Lock” is not
shown on the display, press
[↑
↑↑
↑Prev.] or [↓
↓↓
↓Next].
CEnter the Memory Lock ID (4 dig-
it number).
DPress the {
{{
{Start}
}}
} key.
The received messages are printed.
When the printing is completed,
the Information menu is shown.
Us102-1.tif
Usfax-new063.tif
Us122-1.tif
Usfax-new063.tif