
W32WP
Wall Mantel and Base with Trim
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Important: Read entire instruction sheet before assembling or installing mantel kit.
This mantel is only approved for use with any DESA Heating Products 32" fireplace system and Dimplex Electric Fireplaces. Do not use mantel with any other product.
This mantel kit contains the following:
•Mantel pieces (unassembled)
•Dimplex electric fireplace kit (unassembled)
• | Hardware package | |
• | Bracket hardware kit |
The hardware package
•32 - 1 1⁄4" Screws
•2 - 3" Screws
For Dimplex Electric Fireplace Only use the following:
•14 - 1 1/4" Screws
•2 - Short wood blocks
•1 - Long wood block
•1 - Dimplex header
The hardware kit
•13 - Brackets
•2 - Flat brackets
•36 - 1/2" or 3/4" Screws
Tools required:
•#2 Phillips driver bit (3 1/2" min. length)
•Slotted screw driver
•Pencil
•Measuring tape
•Drill driver
If any wood pieces are missing or damaged, contact the dealer where you purchased this mantel for replacement. If hardware is missing or damaged, contact DESA Heating Products at
Note: Gather all mantel pieces together before assembling mantel.
WARNING: Only use 1 1/4" screws in pocket holes to assemble mantel. Damage to mantel will result if other screws are used for this purpose.
WARNING: Use only 1/2" or 3/4" screws with brack- ets in hardware pack
www.desatech.com