Transmission Features
9
1
F Code (SUB)
Normally you can only use Confiden-
tial Transmission to send to fax ma-
chines of the same make that have the
Confidential Reception feature. How-
ever, if the other machine supports a
similar feature called “F Code”, you
can send fax messages to the other
party using this method instead.
Preparation
You need to assign the F Code fea-
ture to a User Function key before-
hand. ⇒ P.94 “Assigning User
Function Keys”
Limitation
❒You can only use this feature with
G3 communications.
❒You cannot use Chain Dial with
this feature.
❒You cannot select this function
when carrying out standard Confi-
dential Transmission
Note
❒The ID can be up to 20 digits long
and consist of spaces, * and # .
❒Make sure the ID matches the
specification of the fax you are
sending to.
❒You can store IDs in Quick Dials,
Speed Dials, Groups and Pro-
grams.
❒ Messages you send using this fea-
ture are marked “SUB” on all re-
ports.
ASet your document and make any
changes to the scan settings if nec-
essary.
BDial the destination fax number
using the number keys.
CPress the User Function key as-
signed with the F Code feature.
DEnter the function number for
SUB(S) on the number keys.
EEnter the SUB code with the
number keys.
FPress the {
{{
{Start}
}}
} key.
Note
❒If you use Immediate Transmis-
sion and the destination fax ma-
chine does not support the F
Code feature, a message will ap-
pear on the display to inform
you of this. In this case, press
[OK] to cancel the transmission.
Us28-1.tif
TXFile
Status
Immediate
Trans.
Memory
Trans.
Standard
Detail
Super Fine
Commu-
nicating
Receive
File
Confidential
File
Start
Manual RX
TEL
Mode
LTWO800E.eps
Usfax-new008.tif
Usfax-new13.tif
Usfax-new14.tif