Savin C3528, C2824, C4535 manual Specifying an End Receiver, Quick Dial, Speed Dial, Group Dial

Advanced Transmission Features

H Press [Exit].

The following display is shown.

3

Note

❒The numbers of Transfer Sta- tions and End Receivers are dis- played.

I Press the {Start} key.

Specifying an End Receiver

When you make a Transfer Request, you must specify the final destina- tions (End Receivers) for your mes- sage.

You cannot enter the numbers of the End Receivers directly. Instead, enter a simple code that describes where the numbers are stored in the Trans- fer Station (in Quick Dials, Speed Di- als or Groups).

The numbers must first have been stored in Quick Dials, Speed Dials or Groups in the Transfer Station(s).

❖Quick Dial

Enter {q} followed by the number (2 digits) of the Quick Dial where the End Receiver is stored. For example, to choose the number

stored in Quick Dial 01 in the Transfer Station, enter: {q} {0} {1}

❖Speed Dial

Enter {q}, {p} followed by the Speed Dial code (2 or 3 digits). For example, to choose the number

stored in Speed Dial 12 in the Transfer Station, enter: {q} {p} {1} {2}

❖Group Dial

Enter {q} , {p}, {p} followed by the Group number (2 digits). For example, to choose the number

stored in Group 04 in the Transfer Station, enter: {q} {p} {p} {0} {4}

54