Samsung Blu-ray Player Troubleshooting Guide for HT-BD1250 and Home Theater Issues

Troubleshooting

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG.

SYMPTOM	Check/Remedy
I cannot eject the disc.	• Is the power cord plugged securely into the outlet?
	• Turn off the power and then turn it back on.
The iPod fails to connect.	• Check the condition of the iPod connector and Dock.
	• Keep the iPod S/W version up to date.
Playback does not start.	• Check the region number of the BD/DVD.
	BD/DVD discs purchased from abroad may not be playable.
	• CD-ROMs and DVD-ROMs cannot be played on this Blu-ray Home Theater.
	• Make sure that the rating level is correct.
Playback does not start	• Are you using a deformed disc or a disc with scratches on the surface?
immediately when the	• Wipe the disc clean.
Play/Pause button is pressed.
Sound is not produced.	• No sound is heard during fast playback, slow playback, and step motion playback.
	• Are the speakers connected properly? Is the speaker setup correctly customized?
	• Is the disc severely damaged?
Sound can be heard only from a few	• On certain BD/DVD discs, sound is output from the front speakers only.
speakers and not all 6.	• Check if the speakers are connected properly.
	• Adjust the volume.
	• When listening to a CD, radio or TV, sound is output to the front speakers
	only. Select "PRO LOGIC II" by pressing	PL II (Dolby Pro Logic II) on the
	remote control to use all six speakers.
Dolby Digital 5.1 CH Surround Sound is	• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround
not produced.	Sound is produced only if the disc is recorded with 5.1 channel sound.
	• Is the audio language correctly set to Dolby Digital 5.1-CH in the
	information display?
The remote control does not work.	• Is the remote control being operated within its operation range of angle and distance?
	• Are the batteries drained?
	• Have you selected the mode(TV/BD) functions of the remote control (TV or BD) correctly?
• Disc is rotating but no	• Is the TV power on?
picture is produced.	• Are the video cables connected properly?
• Picture quality is poor and	• Is the disc dirty or damaged?
picture is shaking.	• A poorly manufactured disc may not be playable.
Audio language and subtitles do not work.	• Audio language and subtitles will not work if the disc does not contain them.
Menu screen does not appear even	• Are you using a disc that does not contain menus?
when the menu function is selected.

92