Card Drives, Chart Cards, Card drives | Furuno GD-3300, GP-3300

1.11 Card Drives, Chart Cards

Card drives

Two card drives are behind the card drive door: the upper slot is for memory cards which store display data (waypoints, tracks, and marks), and the lower slot is for digitized chart cards.

Displaying an electronic chart with the power turned on

Follow the procedure below to display an electronic chart with the power turned on.

1. Open the card slot door.

Figure 1-10 Opening card slot door

2. Insert chart card label side up in the lower slot.

This side up.

FURUNO NAVIONICS

Card Card

Figure 1-11 Inserting chart card

3.Close the card slot door.

4.Press [ZOOM IN] or [ZOOM OUT] key to display chart.

1-8

Page 19

Image 19

Furuno GD-3300, GP-3300 Card Drives, Chart Cards, Displaying an electronic chart with the power turned on, Card drives

Contents

Page 00080834300 Safety Instructions Furuno agent or dealer About the TFT LCD Table of Contents Video Pilot Display Navigation Data Display External Event Mark Target Mark Lines 11.9 Memory Capacity Chart Symbols, Contour Lines Attributes12.1 Preventive Maintenance 12-1 12.2 Time Differences Geodetic Chart List Word to Furuno GD-3300/GP-3300 Owners Foreword Vii Features Viii Menu Tree GPS Antenna Unit GPA-017S System Configuration Control Description Operational Overview Control description Inserting Chart Cards Turning the power on Turning the Power On/Off Cursor TrackballTurning the cursor on/off +36 44.257’ N Shifting the DisplayReturning Own Ship Marker to Screen Center Cursor information Selecting Screen Center by Cursor Position How to select screen center Display Brilliance and Key Backlighting Chart Scale Card drives Card Drives, Chart CardsDisplaying an electronic chart with the power turned on Insert chart card label side up in the lower slot Press the eject button Ejecting the chart cardChart card troubleshooting Care and handling of the cards Furuno chart symbols Chart iconsTable below shows Furuno chart symbols and their meanings Buoy, lighthouse data display on Navionics charts Comparison of FURUNO, Navionics chart cards Data Window Data shown when cursor is on Nav data mode description Data shown when cursor is offPlot mode description Video pilot mode description Menu operation versus key operation Menu Operation Main menu description Main menu description Summary of menu operation Operation on the DisplaySelecting options Entering data Operational Status Icons Economy Mode Plot display when cursor is on Plot Mode Displays+36 44.257’ N 140.50 35.92NM 134 40.719’ E 36 44.257’ N Plot display when cursor is off 22 Initial Settings menu Setting the Time and Date Stopping Track Recording Track340.5 Changing Color, Appearance of Specific Track Track ColorPress MENU, 9 and 1 to display the EDIT/TRACK Mark menu EDIT/TRACK Mark menu Press MENU, 9, 1 to display the EDIT/TRACK menu Deleting TrackDeleting track by color Deleting specific track with cursor, box cursor Delete Track display Deleting all track Plot interval by time or distance Track Plotting IntervalHow the track is drawn Plot interval and track reconstruction Setting plot interval 2 to time Setting plot interval 1 by time Connecting track after restarting track recording Turning off track display when track is not being recordedCustomizing the Hold Function Tuning off a plot interval Setup for manually entering plot intervalCustomizing the Plot Intvl Key Page Entering marks at own ship’s position MARKS, LinesEntering Marks Entering marks with the cursor Press the Mark Color key to show the Change Mark Color menu Changing Current Mark Color Changing Shape, Color of Specific Marks Deleting marks with the cursor Deleting MarksDeleting specific marks Deleting all marks Erasing an external event mark External Event MarkTarget Mark Lines Changing line color Entering a lineDeleting lines Waypoints Waypoints Waypoint entry by L/L coordinates Entering WaypointsPlace the data input cursor on waypoint Waypoint entry by cursor Waypoint entry by range and bearing Waypoint entry at own ship’s position Waypoint entry by navigation aid Entering a Comment for a Waypoint Turning Specific Waypoint Displays On/Off Deleting waypoints by cursor Deleting Waypoints Deleting external waypoint Setting destination waypoint by cursorDestination Waypoint Deleting waypoints through waypoint list Setting destination waypoint by range and bearing Setting destination waypoint by waypoint number 11 How a destination waypoint is shown on the display When you set a destination waypoint Press the Plot key to display the Data Display Displaying range and bearing to destination waypoint36 34.000’ N 134 20.524’ E Select Cancel from the Dest field Press the ENT key Cancelling Destination WaypointCancelling destination waypoint through the menu Cancelling destination waypoint by key input Sample route Route Navigation Creating routes through the route list Creating Routes Creating routes with waypoint numbers Route key Creating routes with waypoint numbers Menu keyPress the Route key to display the Route NO. menu Select WPT no Enter waypoint numbers Press the ENT key Creating routes with the cursorPress the Route to display the Route NO. menu About route navigation Following a Route Temporarily Deselecting a Route Waypoint Example of when to deselect waypoints Deleting specific route waypoints Deleting Route Waypoints Deleting all route waypoints Cancelling Route Navigation 10 Route list Route Calculation Arrival Alarm, Anchor Watch Alarm AlarmsArrival alarm Alarm range of arrival alarm Anchor watch alarm Border alarm XTE Alarm, Border AlarmXTE alarm Press ← twice Ship’s Speed Alarm What alarm is sounding? When the Alarm Buzzer SoundsSilencing the alarm buzzer Compares the features of the video pilot and plot displays FeaturesVideo Pilot Display Mark data Destination data 135 21.288’ E Comparison of plot and video pilot displays34 44.463’ 34 44.463’ N Navigation Data Display 44 N 135 21 E Autopilot Data Features Available with Autopilot Connection Sample autopilot information on plot display Autopilot Information on Plot Display 134 40.719’ E 10.0KTS Autopilot Information on Video Pilot Display Autopilot in Auto mode Autopilot in Manual mode Autopilot on, destination waypoint selected Autopilot in NAV mode Formatting Memory Cards Memory Card OperationsPress the 3 key to select Save Data to Memory Card Saving Data to Memory Cards Save Track display File name example Playing Back Memory Cards Press the 5 key to select Display Memory Card Saving, Playing Back Initial SettingsSaving initial settings Playing back initial settings Adding track, marks/lines Editing Memory CardsDeleting track, marks/lines from a memory card Deleting files 10-1 GPS Receiver Operation GP-3300GPS Information on the Navigation Data Display GPS receiver status Frequency deviation Satellite schedule10-2 Satellite data GPS and Dgps Initial Settings10-3 Describes the GPS Initial Settings menu GPS initial settings menu description10-4 10-5 Satellite Force Health/DeselectionPress Menu and 8, and then press − to set the cursor on 10-6 GPS SmoothingSpeed and course GPS smoothing Latitude and longitude GPS smoothing 10-7 Setting GPS smoothing 10-8 Cold Start 10-9 Selecting chart systemGeodetic Datum Correcting GPS Position 11-1 Other FunctionsDisplaying Position in Loran TDs Displaying position in Loran a TDs Displaying position in Loran C TDs Bearing Display Reference11-2 Displaying true bearing Magnetic Deviation11-3 11-4 Changing Chart Appearance Correcting chart position by cursor Correcting Chart Position11-5 Corrections chart position by Δ Delta L/L Correcting chart position by latitude and longitude11-6 Loran TD Correction Cancelling chart position correction11-7 Calculating R/B by latitude and longitude Calculating R/B Between Two Points11-8 11-9 Calculating R/B by waypoint numbers Memory Capacity Locking Preferred SettingsLocking or unlocking preferred settings Default memory arrangement is as shown in Figure Track memory When the track memory becomes full oldest track is deleted11-11 11-12 When the mark memory becomes full no marks can be enteredApportioning the Memory Mark/line memory 11-13 Reading Number of Track, Marks Used 11-14 Smoothing 11-15 Selecting Navaid 11-16 Track, Mark and Marker Attributes Special menu Initial settings menu11-17 11-18 Customizable items on the Initial Settings menu 11-19 Chart Symbols, Contour Lines AttributesSelect item and option as appropriate Press the ENT key Preventive Maintenance Maintenance & Troubleshooting12-1 12-2 Diagnostic TestsSelf test at power on Memory circuits, I/O ports 12-3 Keyboard testTo escape from the test, press any key Check the pattern for color dropout Press any key to escape Test pattern 1 color dropoutTest pattern 2 color distortion 12-4 12-5 Error Messages No files on memory card to delete 12-6Memory card replaced during operation No file by that name exists 12-7 Replacement of FuseWaypoint being used as destination waypoint Memory card battery Replacement of Batteries12-8 12-9 Verifying Program Version NoPlotter section GPS section GP-3300 12-10 Troubleshooting Table 12-11 12-12 Clearing Memories Press the 8 key to select Clear Memory 12-13 Time Differences Appendix Adindan Geodetic Chart List GD/GP-3300 Specifications of Color Video PLOTTER/COLOR GPS Plotter Coating Color Index-1 Index Index-2 Index-3

Furuno GD-3300 Card Drives, Chart Cards, Displaying an electronic chart with the power turned on

Models: GP-3300 GD-3300