Furuno GD-3300 manual Verifying Program Version No, Plotter section, GPS section GP-3300, 12-9

12.6 Verifying Program Version No.

The procedure which follows shows how to verify the program ver- sion no. of both the plotter section and the GPS section (GP-3300).

Plotter section

1.Press the [MENU] key.

2.Press the [8] key select INITIAL SETTINGS.

The plotter program number and its version number appear at the bottom of the display. The extreme right two digits are the ver- sion number.

8 INITIAL SETTINGS

SELF TEST	:	OK
PROGRAM NO.	:	14517020 xx

Program no. of plotter section

xx : Version number

Figure 12-7 INITIAL SETTINGS menu, showing

location of plotter secttion program number

GPS section (GP-3300)

3.Press [−] to select PAGE CHANGE (TO GPS INITIAL SET- TINGS).

The GPS section program number and its version number appear at the bottom of the display. The extreme right two digits are the version number.

8 INITIAL SETTINGS

￿ : SELECT ITEM

: SELECT PARAMETER PROGRAM NO. : 48501050 xx

Program no. of GPS section

xx : Version number

Figure 12-8 GPS INITIAL SETTINGS menu, showing

location of GPS section program number

12-9