Furuno GD-3300, GP-3300 manual Save Track display

Data input cursor

3-1 SAVE TRACK

DATE CREATED POINTS

00CREATE NEW FILE

07

TOTAL NO. OF FILES = 0

SELECT FILE TO BE SAVED USING −↓. ENTER FILE NAME BY USING TRACKBALL. SET CURSOR ON OK BY USING TRACKBALL. PRESS ENT TO SAVE.

Figure 9-4 SAVE TRACK display

5.The red cursor should be on 00. This will save data to a new file. You may save data to an existing file name, in which case all previous data on that file will be deleted.

6.Assign a file name. The file name may contain 32 alphanumeric characters. You can switch between upper and lower case letters by operating the [ZOOM IN], [ZOOM OUT] keys.

ZOOM

OUT

ZOOM

IN

(These are lower case characters.)

Figure 9-5 How to select upper and lower case letters

9-3