Fostex D2424 Using a Program Change function, Deleting a Program, P01 P02 P03 P04 P05 P06 P07

Model D2424 Reference Manual (Handling Programs)

Using a Program Change function

If multiple Programs exist on the disk, you need to select a Program to record, play, or edit. This section describes how to select a Program.

<Note>

You cannot use the Program Change function when the recorder is in SETUP mode.

1. When the recorder is stopped, press the [PGM] key.

“Select PGM!” appears on the display briefly, then changes to a flashing “01” and “SURE?”. (“****” is the name of PGM 01.)

OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

		Flashing																							Flashing
			SURE?																						PGM
OL																							OL	BIT	24
0																							0
3																							3			FS
6																							6
9																							9			kHz
12																							12		CLOCK
18																							18
24																							24			INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

Rotating the [JOG] dial counter-clockwise decreases the number, and rotating it clockwise increases the number. If you turn the [JOG] dial clockwise all the way, “New Program?” will be selected. Select “New Program ?” to create a new Program as mentioned in the previous section “Creating a new Program.”

3. Press the [EXECUTE/YES] key.

The ABS Time Base indication for the selected Program appears.

In this way, you can be sure to select a Program before you start working.

2.Turn the [JOG] dial to select the desired Program number (flashing).

Deleting a Program

This section explains how to delete an unnecessary Program.

Deleting an unnecessary Program will expand the recordable area, making your work flow more smoothly, since recording or editing requires sufficient recordable area (free space on the disk). Use the [Delete PGM ?] menu in SETUP mode to delete a Program.

<Notes on deleting a Program>

•You can delete only the currently-selected Program. Refer to the previous section, “Using a Program Change function,” for information on how to select the desired Program before you proceed to delete the Program.

•If only one Program exists and you try to delete it, data contained in the Program will be deleted, but the Program itself will remain. For example, assume that PGM 01 -07 exist and you try to delete PGM 05. Program number 05 will remain, but the data inside PGM 05 will be replaced with the data of PGM 06.

The subsequent Programs’ data will move in the same way. Therefore, it will appear that PGM 07 has been deleted.

If you delete the last Program (PGM 07 in this example), PGM 07 will be completely deleted.

If you try to deleted PGM 05, only the data of PGM 05 will be deleted and the data of PGM 06 will move into PGM 05.

<Note>

P01 P02 P03 P04 P05 P06 P07

If you try to deleted PGM 05, only the data of PGM 05 will be deleted and the data of PGM 06 will move into PGM 05.

After deleted

P01 P02 P03 P04 P05 P06

You cannot use the Single Undo/Redo function, and Multiple Undo function to delete Programs. Make sure that you delete the correct Program.

37