Fostex D2424 manual Loading the data using Scsi, Load the data saved on one removable disk

Model D2424 Reference Manual (Saving and Loading Song Data)

<Notes on saving all programs in several disks>

In the previous procedure, when the left and right numbers were different such as "(05/08)" in the "(**/**)" display of "Save All (**/**)," it could not be saved in one disk, and indicated that a multiple number of disks were required. For example, if save was executed while "Save All (05/08)" was displayed, programs 1-5 could be saved in the first disk but programs beyond 6 had to be saved in another disk.

In this case, if save is continued in the second disk, the same B01 (backup number 01) for the first disk will be attached and saved. In other words, if "All save" is executed in a multiple number of disks, backup number "B01" will be attached to all of the backup disks. For this reason, on the disk after it has been saved, it is recommended to clearly indicate what program is stored in it.

Loading the data using SCSI

Here you are loading on the current drive, the data of each program saved on the backup purpose SCSI disk. The prerequisite is that a backup SCSI drive is connected to the recorder.

Load the data saved on one removable disk.

Load the program with the “Load PGM?” menu in the SETUP mode.

• Input format available	:	adat, SPDIF, SCSI, IDE2
• Programs available	:	When using an adat/SPDIF	->P01 - P99 (each program individually)
	:	When using a SCSI/IDE2	->P01 - P99 or All program

• Track available	: When using an adat or DAT->Tracks 1-8, 1-16, 1-24, 1-32, 1-40
	1-48, 1-56, 9-16, 9-24, 9-32, 9-40, 9-48, 9-56, 17-24, 17-32, 17-40
	17-48, 17-56, 25-32, 25-40, 25-48, 25-56, 33-40, 33-48, 33-56,
	41-48, or 49-56
	: When using a SCSI/IDE2 ->All tracks (1-56) will be automatically
	selected.

1.Press the [SETUP] key.

The recorder will enter the SETUP mode.

2.Use the [JOG] dial to select “Load PGM?,” and press the [EXECUTE/YES] key.

An indication of the type of the digital signal to be loaded will flash on the display.

SETUP

OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24		DIGITAL

Flashing

SETUP

OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

4. Select the backup number and press the [EXECUTE/YES] key.

It will change to the display for setup of a new program in the current drive.

Flashing Flashing

SURE?

OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

Turning the [JOG] dial in this state makes it possible to select another program, other than the above, on the current drive. The size of the program appears when the program is selected.

If you select a program that is already recorded with data and load is executed for the load destination, the existing data is deleted while loading takes place.

If you do not want to overwrite the existing data, select “New PGM” mentioned above, prior to loading.

3. Press the [EXECUTE/YES] key while "SCSI 6" is flashing.

It will change to the display for selecting the backup number saved in the backup disk.

Flashing

SETUP

OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

When the [JOG] dial is rotated, in addition to each backup number, "Load All?" can be selected.

All programs can be loaded when "Load All? (**/**)" is selected.

5.Press the [EXECUTE/YES] key.

Song data will be loaded to the selected Program.

If, for example, backup 1 is started for Program 1, then “B01 >> P01 ***MB” will appear, “REMAIN” lights up, load proceeds, and “***MB (program size)” is counted down, when individual programs are loaded.

When the load operation is complete, “COMPLETED!” will light and the recorder will display the Time Base that was shown before the unit entered the Setup mode.

6.Press the [STOP] button or the [EXIT/NO] key.

“COMPLETED!” will turn off.

<Note>

You cannot abort a load operation on a SCSI device while it is in progress.

95