Fostex D2424 manual Setting the Metronome function Click ? menu, 111

Model D2424 Reference Manual (Changing the Initial Settings <SETUP mode>)

Setting the Metronome function (“Click ?” menu)

“Setting the Metronome function” menu allows you to determine whether or not the recorder outputs a metronome sound from Real track (track 24) during playback or recording.

Turning the Metronome function on enables you to record your performance while playing the instrument accompanying the metronome sound.

<Notes>

*The metronome sound is output from track 24 in the D2424.

*When the metronome function is switched ON, the metronome sound cannot be recorded on the output track nor can the recorded sound be played back. However, in a D2424 formatted in 96kHz/24bit (8 track) or 88.2kHz/24bit (8 track), as the metronome sound will be output from track 24, real tracks1-8 can all be used for record / playback.

• Initial setting:	[Off]
• Option:	[Off], or [On]

*You can turn the function on and off for each Program individually.

*The settings cannot be saved and loaded as part of the song data.

*The settings are maintained after you turn off the power to the recorder.

Setting the Metronome function

1.While the recorder is stopped, press the [SETUP] key to enter SETUP mode.

2.Turn the [JOG] dial to select “Click ?” (“?” flashes.), then press the [EXECUTE/YES] key.

The current setting (“Off” or “On”) appears on the display.

Pressing the [EXECUTE/YES] key lights up the flashing “?” character steadily; the current setting flashes. The initial setting is “Off” as shown below.

SETUP

OL			OL	BIT	24
0	0
3		3			FS
6			6
9		9			kHz
12		12			CLOCK
18		18
24		24			INT
30		30
42	42
∞			∞

3.Turn the [JOG] dial to select “On” or “Off”.

Selecting “On” will enable the output of the metronome sound. Selecting “Off” (initial setting) will disable the metronome output.

4.Press the [EXECUTE/YES] key.

The display shows the selection (On or Off), then returns to the indication in step 2.

To cancel the setting operation, or to exit SETUP mode after storing data, press the [STOP] button or the [EXIT/ NO] key. Each time you press one of these keys, the recorder returns to the previous hierarchy level of the menu, and finally exits SETUP mode.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Flashing

SETUP

OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

111