Fostex D2424 manual Selecting Setup mode, 106

Model D2424 Reference Manual (Changing the Initial Settings <SETUP mode>)

Selecting SETUP mode

Follow the steps below to select the desired SETUP menu in SETUP mode.

1. While the recorder is stopped, press the [SETUP] key on the control panel.

Pressing the [SETUP] key causes the recorder to enter SETUP mode. The recorder displays the first hierarchy level of the SETUP menu you selected before you turned off the power. At this time, the menu graphic appear as shown below. The flashing menu indicator is the currently-selected menu. Turning the [JOG] dial will select a different menu and the corresponding menu indicator will flash.

The title of the SETUP menu appears. You can select a different menu via the [JOG] dial.

SETUP

OL			OL	BIT	24
0	0
3		3			FS
6			6
9		9			kHz
12		12
					CLOCK
18		18
24		24			INT
30		30
42	42
∞			∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

<Note>

With the factory initial settings, or when you turn on the power again after you format a current drive disk, “Signature Set? (Setting a signature)” appears. Otherwise, the first hierarchy level of the previously-selected SETUP menu appears.

This indicates the position of the SETUP menu. Selecting a menu via the [JOG] dial will move the flashing cursor.

To exit SETUP mode, press the [STOP] button or the [EXIT/ NO] key. Each time you press one of these keys, the recorder returns to the previous hierarchy level of the menu, and finally exits SETUP mode.

2. Select the desired menu using the [JOG] dial, then press the [EXECUTE/YES] key.

The recorder displays the second hierarchy level of the selected SETUP menu, where you can set parameters.

Tempo Map Set ?

Track name Edit ?

Click

?

Midi Sync Out?

MTC offset ?

Offset Mode?

Preroll Time?

Frame Rate ?

Signature Set?

Title Edit ?

Delete PGM ?

Ref. TC ?

Disk Format?

Slave Type ?

Reserved

Rec Protect ?

Disk Optimize ?

D. in ?

Reserved

D. out?

Date & Time Set ?

Resolution?

Device ID ?

Save PGM ?

Load PGM?

Clock Sel. ?

Drive Sel. ?

BAL/UNBAL?

Mark Stop MD?

Chain Play?

Auto EE mode?

Sync Preset?

Drive Info ?

Ref. Level?

Offset Disp ? Virtual LTC ? NOs Of Event ?

Contrast?

Chain Play List?

Foot SW ?

Reserved

<Note>

Although titles of the “Ref. TC ?” menu, “Offset Disp ?” menu, “Virtual LTC ?”menu and “Sync Preset ?” menu will also be displayed, these menus will only function when an optional Model 8345 TC/SYNC card is installed. Refer to the APPENDIX for details. “Reserve” is the extra position for future extension of the SETUP mode menu.

106