Fostex D2424 manual Cue & Review function using the Rewind and F FWD buttons

Model D2424 Reference Manual (Cue & Review Function)

Cue & Review Function

This chapter explains how to use the “Cue & Review” function with the [REWIND] button, the [F FWD] button, and the [SHUTTLE] dial, and also explains “Digital Scrubbing” with the envelope function. During Cue/Review and Digital Scrubbing you will hear the sound recorded on the disk, which makes it easy for you to swiftly locate the desired point without failure while listening to the sounds.

The prerequisite of the following operation is that the time base is ABS, however, the operation can be executed in any time base. To execute this function with a non-ABS time base there is a need to priory switch over to the desired time base.

Cue & Review function using the [REWIND] and [F FWD] buttons

You may cue & review the audio data at five-times speed while the recorder is playing.

1.Press the [PLAY] button to play the audio data.

2.Press the [F FWD] button during playback.

This cues in the forward direction at five-times speed. The PLAY LED and F FWD LED lights up while cuing is taking place.

3.Adjust the monitor sound of the track to monitor on the mixer.

4.Press the [PLAY] button again to restore the original play back speed.

5.Press the [REWIND] button instead of the [F FWD] button.

This cues in the rewind direction at five-times speed. The PLAY LED and REWIND LED lights up while cuing is taking place.

6.Press the [PLAY] button to restore the original playback speed.

Cue & Review function using the [SHUTTLE] dial

You can use the [SHUTTLE] dial for +1~-7 times or -1~-8 times

1.Press the [PLAY] button to start playback.

2.Turn the [SHUTTLE] dial clockwise during playback.

The forward direction cue speed variates from +1~ -7 times speed depending on the degree (angle) of turning the dial. PLAY LED flashes and F FWD LED lights up during the cue process.

3.Adjust the monitor sound of the track to monitor on the mixer.

4.Let go of the [SHUTTLE] dial to return to normal play speed.

5.Similarly, turn the [SHUTTLE] dial counterclockwise during playback.

The rewind direction review speed variates from -1~ -8 times speed depending on the degree (angle) of turning the dial. PLAY LED flashes and REWIND LED lights up during the review process.

6.Let go of the [SHUTTLE] dial to return to normal play speed.

Digital scrubbing using the envelope function

You may perform digital scrubbing using the “Envelope Function” of the recorder while the recorder is stopped. The envelope function allows digital scrubbing for each track recorded. The display will show the envelope indication of the track selected.

1

AUTO RTN

AUTO RTN

AUTO PLAY

CLIPBOARD

AUTO PUNCH

PGM SEL

EXIT/NO

EXECUTE/YES

IN

OUT

START

IN

OUT

END

24TRACK DIGITAL RECORDER

PREVIEW

EJECT

CHASE

CHARACTER

LOCATE MEMORY

EDIT

SETUP

UNDO/REDO

PREV

NEXT

DISP SEL

STORE

RECALL

POWER

SHIFT

TC READY

TC GEN

M.UNDO

PREV TC

NEXT TC

TIME BASE SEL

HOLD

24bit

AUTO

REHEARSAL

LOCATE

VARI PITCH

96kHz

PUNCH

TAKE

OPTICAL

P.EDIT

RECORD TRACK

RECORD

STOP

PLAY

REW

F FWD

2

1/9/17

2/10/18

3/11/19

4/12/20

5/13/21

6/14/22

7/15/23

8/16/24

TRACK SHIFT

FOOT SW

ENVELOPE

ALL INPUT

ALL READY

ACCESS

9-16

17-24

TRACK SHIFT

CLIPBOARD PLAY

LOCATE ABS 0

LOCATE REC END

1, 4

5

60