Fostex D2424 manual Clipboard In key Clipboard IN/PREVIEW, Clipboard Out key Clipboard OUT/PREVIEW

Model D2424 Reference Manual (Names and Functions)

Auto Repeat mode:

This mode is a combination of Auto Play and Auto Return, and plays back the part between the START and END points repeatedly. The auto repeat function is effective only when the START and END points have been specified correctly.

* Refer to page “54” for details.

*Refer to page “39” for more information about Auto Punch In/Out recording.

*Refer to page “66” for more information about pasting data.

*Refer to page “70” for more information about the Erase operations.

*Refer to page “62” for previewing data at the AUTO PUNCH IN point.

5. Clipboard In key [CLIPBOARD IN/PREVIEW]

This key is used to store and recall the In point (CLIPBOARD IN point) for the Copy or Move operation. You can locate a stored CLIPBOARD IN point. If you press the [CLIPBOARD IN] key while holding down the [SHIFT] key when the recorder is stopped, you can preview the fade-in part at the stored CLIPBOARD IN point.

*Refer to page “66” for copying/moving data.

*Refer to page “54” for locating the CLIPBOARD IN point.

*Refer to page “62” for previewing data at the CLIPBOARD IN point.

6.Clipboard Out key [CLIPBOARD OUT/PREVIEW]

This key is used to store and recall the Out point (CLIPBOARD OUT point) for the Copy or Move operation. You can locate a stored CLIPBOARD OUT point. If you press the [CLIPBOARD OUT] key while holding down the [SHIFT] key when the recorder is stopped, you can preview the fade-out part at the stored CLIPBOARD OUT point.

*Refer to page “54” for locating the CLIPBOARD OUT point.

*Refer to page “66” for copying/moving data.

*Refer to page “62” for previewing data at the CLIPBOARD OUT point.

7.Auto Return Start key

[AUTO RTN START/PREVIEW]

This key is used to store and recall the start point (AUTO RTN START point) for the Auto Return or Auto Repeat operation. You can locate a stored AUTO RTN START point. If you press the [AUTO RTN START] key while holding down the [SHIFT] key when the recorder is stopped, you can preview the fade- in part at the stored AUTO RTN START point.

*Refer to page “54” for locating the AUTO RTN START point.

*Refer to page “66” for copying/moving data.

*Refer to page “62” for previewing data at the AUTO RTN START point.

8.Auto Punch In key [AUTO PUNCH IN/PREVIEW]

This key is used to store and recall the recording start point (AUTO PUNCH IN point) for the Auto Punch IN/OUT operation. This point is also used as an erase point. You can locate a stored AUTO PUNCH IN point. If you press the [AUTO PUNCH IN] key while holding down the [SHIFT] key when the recorder is stopped, you can preview the fade-out part at the stored AUTO PUNCH IN point.

9. Auto Punch Out key [AUTO PUNCH OUT/PREVIEW]

This key is used to store and recall the recording end point (AUTO PUNCH OUT point) for the Auto Punch IN/OUT operation. This point is also used as an erase point. You can locate a stored AUTO PUNCH OUT point. If you press the [AUTO PUNCH OUT] key while holding down the [SHIFT] key when the recorder is stopped, you can preview the fade-in part at the stored AUTO PUNCH OUT point.

*Refer to page “39” for more information about Auto Punch In/Out recording.

*Refer to page “70” for more information about the Erase operation.

*Refer to page “62” for previewing data at the AUTO PUNCH OUT point.

Memory keys (CLIPBOARD IN, CLIPBOARD OUT,

AUTO RTN START, AUTO PUNCH IN, AUTO PUNCH OUT, and AUTO RTN END keys) have the following common functions:

•Pressing a Memory key to recall the point the key is storing displays the memory data (time, or bar/beat/ clock) currently stored in that key; then the recorder enters data edit mode. To edit data, use the [SHUTTLE] dial to move among the digits, and then use the [JOG] dial to change the value.

•After you finish editing data, press the [STORE] key, and then press one of the Memory keys into which you want to store the point. The edited data will be stored in the specified Memory key.

•While the current position of the recorder is indicated, press the [STORE] key, then one of the Memory keys into which you want to store the data. The current position or the recorder will be stored in the Memory key. You can do this while the recorder is running or stopped.

•Press a desired Memory key, and then press the [LOCATE] key to locate the point stored in that Memory key (time, or bar/beat/clock).

•In Setup mode, you can save or load song data for each Program.

•All data will be retained after you turn off the power.

*Refer to page “50” for more information on memory data.

*Refer to page “54” for more information on the Locate function.

*Refer to pages “26” and “37” for more information on the Program Change function.

*Refer to page “85” for more information on saving and loading song data.

12