Fostex D2424 manual Saving data of an individual Program, If you have selected all Programs

Model D2424 Reference Manual (Saving and Loading Song Data)

Saving data of an individual Program

When saving with a SCSI disk it is possible to save each program or all programs.

• Output format available	: adat, SPDIF, SCSI, IDE2
• Programs available	: When using an adat/SPDIF	->P01 - P99 (each program individually)
	: When using a SCSI/IDE2	->P01 - P99 or All program

• Track available	: When using an adat or DAT->Tracks 1-8, 1-16, 1-24, 1-32, 1-40
	1-48, 1-56, 9-16, 9-24, 9-32, 9-40, 9-48, 9-56, 17-24, 17-32, 17-40
	17-48, 17-56, 25-32, 25-40, 25-48, 25-56, 33-40, 33-48, 33-56,
	41-48, or 49-56
	: When using a SCSI/IDE2 ->All tracks (1-56) will be automatically
	selected.

1.Press the [SETUP] key.

The recorder will enter the SETUP mode.

2.Use the [JOG] dial to select “Save PGM?” (“?” will flash.), and press the [EXECUTE/YES] key.

The indication of the type of digital signal to be saved will flash on the display.

SETUP

OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

Flashing

SETUP

OL	OL	BIT	24
0	0
3	3		FS
6	6
9	9		kHz
12	12		CLOCK
18	18
24	24		INT
30	30
42	42
∞	∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

•If you have selected each Program that requires only one disk to save:

Flashing

SETUP SURE?

OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

• If you have selected all Programs:

Flashing

SETUP

OL	OL	BIT	24
0	0
3	3		FS
6	6
9	9		kHz
12	12		CLOCK
18	18
24	24		INT
30	30
42	42
∞	∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

3.Rotate the [JOG] dial to select a flashing “SCSI 6,” and press the [EXECUTE/YES] key. (“SURE?” flashes.)

It will change to the display for selecting the backup mode (FDMS3 or WAVE). In the example here, "FDMS3" is flashing.

If all programs can be saved in one disk, same numbers such as 03/03 will be shown in (**/**). However, if it displays, for example 02/04, it means only 2 from among the 4 programs can be saved in the backup disk.

Flashing

SETUP

OL	OL	BIT	24
0	0
3	3		FS
6	6
9	9		kHz
12	12		CLOCK
18	18
24	24		INT
30	30
42	42
∞	∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

4.Press the [EXECUTE/YES] key.

It will change to the display for selecting the program to be saved.

At this point, when the JOG dial is rotated, in addition to separate programs, "Save All (**/**)?" can be selected.

•If you have selected each Program that requires multiple disks:

The following indication, for example, appears. (**** is the tentative title, the program number flashes, the information on the size of the program and number of disks necessary, alternate.)

This display indicates that one SCSI hard disk is not enough to save the program chosen, and that several disks are necessary to proceed with the save procedure. In the following example you see a “2D” indication as the number of disks necessary.

This indicates that 2 disks are necessary to execute the save procedure.

Flashing

SETUP SURE?

When "Save All (**/**)?" is selected, all the programs can be saved (Read explanation in following).

Depending on the selected program, the display will be as follows.

OL	OL	BIT	24
0	0
3	3		FS
6	6
9	9		kHz
12	12		CLOCK
18	18
24	24		INT
30	30
42	42
∞	∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

93