Fostex D2424 manual Preset Display

Model D2424 Reference Manual (Names and Functions)

2. Preset Display

The display below shows all preset items for explanation purpose.

35 dot message display

This display indicates the ABS time, MTC time value or bar/beat/clock value, and a parameter name in the SETUP mode.

Level meter

Displays recorder output level or recording level for each track.

In the current drive formatted to 96 kHz 24 bits or 88.2 kHz 24 bits, only tracks 1-8 will function.

SETUP COMPLETED! SURE?																		LTC MTC IN ABSCHASE OFFSET LOCATE GEN UB REMAIN
																					H		M		S	F	SF
																							BAR			CLK	MB
																											PGM %
OL OL																								OL OL		BIT 16	24
0	0																							0	0
3	3																							3	3		FS
6	6																							6	6
9	9																							9	9		kHz
15	12																							15	12		CLOCK
20	18																							20	18
25	24																							25	24		INT
30	30																							30	30	MIDI	EXT
40	42																							40	42
∞	∞																							∞	∞	CHASE	WORD
	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24			VIDEO
																										TC RDY	DIGITAL
DIGITAL																								DIGITAL

Track indications

Each frame will blink when the track is READY, be extinguished in the SAFE mode and be lighted during recording. In the current drive formatted to 96 kHz / 24 bits, only tracks 1-8 will function.

These will light when locked to digital in and "-" for the track set to digital-in will light up.

ABS	Lights up when ABS is selected as Time base.
MTC	Lights up when MTC is selected as Time Base.
SIGNATURE	Lights up to indicate a bar/beat/clock value when
	BAR/BEAT/CLK is selected as Time Base.
	Lights up when the recorder enters data edit mode,
LOCATE	enabling you to edit data. Pressing the LOCATE
	key while this indicate is lit will cause the recorder
	to locate the position of the displayed time or the
	bar/beat/clock value.
REMAIN	Lights up to indicate available recording time and
	space on the disk.
MTC IN	With the optional Model 8345 TC/SYNC card
TC IN	installed, this will be lit when MTC or LTC is
	externally input.
MTC OFFSET	Lights up when MTC OFFSET menu is selected
	in SETUP mode.
CHASE	Flashes when "Slave mode" is turned on.
	When a signal is locked, the flashing indicator lights
	up steadily.
PGM	Lights up to indicate the current program number.
TEMPO	Lights up when the tempo setting menu is selected
	in SETUP mode.
BIT 16, 24	Sampling frequency/quantization at formatting
FS	are displayed. This will also blink to warn that
	digital signals (S/P DIF or adat) of a wrong
Hz
	sampling frequency are being input.
SURE?	This message is shown to confirm whether or not
	you wish to execute a certain operation.

MIDI	This indication lights up when the recorder
	receives effective MIDI message from an external
	MIDI device.
SAVE	When the recorder enters save function mode, the
	selected parameter name will appear here.
LOAD	When the recorder enters load function mode,
	the selected parameter name will appear here.
DIGITAL	This lights when a digital input track is set and a
	digital signal is correctly input. It will blink if the
	digital signal is not correctly input.
COMPLETED!	This message indicates that an operation such
	as copy, move and paste has been completed.
INT	This lights up when the D2424 is operating
	using the internal clock.
EXT	This lights up when the D2424 is operating in
	sync with an external sync signal.
WORD	This lights up together with display of [EXT]
	when the D2424 is in sync with an external word
	signal.
VIDEO	This lights up together with display of [EXT]
	when the D2424 is in sync with an external
	video signal.

<Note>

When D2424 is not in sync with external sync signals (word/video) and digital IN signals, [EXT], [WORD], [VIDEO] or [DIGITAL] display will blink.

If this display is blinks, inspect the connectors and cables between external digital equipment and check that sync signals or digital signals from external equipment are correctly input.

	This blinks when the recorder is entered in the
TC RDY	TC READY mode by pressing the [EDIT] key
	while holding down the [SHIFT] key, and will
	light during recording of TC.

20