Fostex D2424 manual Flashing

Model D2424 Reference Manual (Editing Tracks)

• Exchanging in group track units • Exchange in mono track units

1.By pressing the [EXECUTE/YES] key after “TRK Exch. Group?” is displayed, the display will change as shown below.

This display is indicating that, at present, tracks 1- 8 and 9-16 can be exchanged.

"*****" is indicating the track name of the flashing track left two digits (In this example - Name of track 01).

																		Flashing
OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

2.If the [JOG] dial is rotated while "01 08" is flashing, the 8 track unit numbers ("09 16," "17 24," "25 32," "33 40," "41 48," "49 56") or pair track unit numbers ("01 02," "03 04"... "55 56") will be alternately displayed.

3.After selecting the left side track, press the [NEXT] key to move to the flashing right side.

Flashing

OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

4.Display the desired track by rotating the [JOG] dial in the same manner as Step 2.

If the flashing display is to be moved from right to left, either press the [REV] key or rotate the [SHUTTLE] dial.

5.After selecting the left right tracks, press the [EXECUTE/YES] key.

Track exchange is executed and simultaneous with completion, "COMPLETED!" is displayed. The D2424 will then return to the display prior to entering the edit mode.

Regardless as to whether "Exch.01 08-09 16" or "Exch.09 16-01 08" is input, there will be no difference in the fact that tracks 1-8 and tracks 9- 16 have been exchanged.

1.Upon display of the previously mentioned "TRK Exch.Mono?," then pressing the [EXECUTE/YES] key, the display will change as shown below.

This display indicates that, at present, tracks 1 and 2 can be exchanged.

"*****" is indicating the track name of the flashing track. In this case, the name of track 01.

																			Flashing
OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

2.If the [JOG] dial is rotated when "01" is flashing, the mono track unit numbers ("01"-"56") will be alternately displayed.

3.After selecting the left side track, move to the right side flashing by pressing the [NEXT] key.

Flashing

OL	OL	BIT	24
0	0
3	3		FS
6	6
9	9		kHz
12	12		CLOCK
18	18
24	24		INT
30	30
42	42
∞	∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

4.The same as in Step 2, display the desired track by rotating the [JOG] dial.

Press the [REV] key or rotate the [SHUTTLE] dial to move the flashing number from right to left.

5.After selecting the left and right tracks, press the [EXECUTE/YES] key.

Track exchange is executed and simultaneous with completion, "COMPLETED!" is displayed and then returned to the display prior to entering the edit mode.

Whether "Exch.01-09" or "Exch.09-01" is input, there will be no difference in the fact that track 1 and track 9 have been exchanged.

<Note>

You cannot select the same track for left and right. If the same track is mistakenly specified, "Select Err" will be displayed for an instant and then returned to the display prior to execution.

<Note>

You cannot select the same track for left and right. If the same track is mistakenly specified, "Select Err" will be displayed for an instant and then returned to the display prior to execution.

• As it stands, data in the additional track cannot be played back or REC END confirmed.

To do this, data must be moved temporarily onto a real track. When saving the data to an external DAT, adat or SCSI, data on the additional track will be saved in its original state and, when reloading, will be reinstalled on the disk the same as prior to saving it.

73