Fostex D2424 manual Controller Connection Cable, Record track select key

Model D2424 Reference Manual (Names and Functions)

Detachable Controller section

1

2

3

4

5 6

7

11 13

8 9 10 12 14 15

AUTO RTN

AUTO RTN

AUTO PLAY

CLIPBOARD

AUTO PUNCH

PGM SEL

EXIT/NO

EXECUTE/YES

IN OUT

START

IN

OUT

END

24TRACK DIGITAL RECORDER

PREVIEW

EJECT

CHASE

CHARACTER

LOCATE MEMORY

16

EDIT

SETUP

UNDO/REDO

PREV

NEXT

DISP SEL

STORE

RECALL

36

SHIFT

TC READY

TC GEN

M.UNDO

PREV TC

NEXT TC

TIME BASE SEL

HOLD

18

TAKE

24bit

AUTO

REHEARSAL

LOCATE

VARI PITCH

17

96kHz

PUNCH

OPTICAL

P.EDIT

		RECORD TRACK			RECORD	STOP	PLAY	REW	F FWD
35	1/9/17 2/10/18 3/11/19 4/12/20	5/13/21	6/14/22 7/15/23 8/16/24	TRACK SHIFT					19
	FOOT SW
		ENVELOPE		ALL INPUT	ALL READY
	ACCESS	9-16	17-24	TRACK SHIFT		CLIPBOARD PLAY
						LOCATE ABS 0
						LOCATE REC END

30 28 26 24 22 20

34 33 32 31 29 27 25 23 21

1. Controller Connection Cable

Connect this cable to the recorder controller connection jack.

2.Record track select key

[RECORD TRACK/ENVELOPE]

"SAFE-READY" of the recording track can be selected (The track can be selected by shifting to 1-8, 9-16 or 17-24 with the [TRACK SHIFT] key.

If the select key is pressed once, that track will be in the READY state and the track display () will blink. It will change to SAFE if pressed again and the track display will be extinguished.

When recording is started from the READY mode, the blinking track display will light.

If the [RECORD] button only is pressed from the READY mode, the READY track only will enter input monitor mode, and the recording level can be adjusted. If the [RECORD] button is pressed once again, the D2424 will return to repro monitoring.

*All TRACK SHIFT LED extinguished: Tracks 1-8 can be selected.

*"9-16" are lighted: Tracks 9-16 can be selected.

*"17-24" are lighted: Tracks 17-24 can be selected.

All real track input monitors can be switch on or off each press of this key while pressing [SHIFT] key. When all tracks are set to input monitor, the ALL INPUT LED will light.

4. Auto Play/Auto Return key [AUTO RTN/PLAY]

Pressing this key repeatedly will change Auto Play mode, Auto Return mode, and Repeat mode On/Off as follows: ( : LED off, : LED light up)

AUTO RTN

Auto Return/ Auto Play mode is OFF.

AUTO PLAY

(No indication)

AUTO RTN

AUTO PLAY	Auto Play mode is ON.
	(Only the AUTO PLAY LED is lit. )

If any select key is pressed together with the [SHIFT] key, the envelope function of that track can be

AUTO RTN

AUTO PLAY

Auto Return mode is ON.

executed. This key is also used for editing such as copy paste, move paste and erase.

*Refer to page “28” for details about the reproduction monitor and the input monitor.

*Refer to page “60” for details about the envelope function.

*Refer to page “66” for details about the copy/paste and move/paste function.

(Only the AUTO RTN LED is lit. )

AUTO RTN

Auto Repeat mode is ON.

AUTO PLAY

(Both AUTO PLAY and AUT RTN LEDs are lit. )

Auto Play mode:

In this mode, playback will start automatically after the START point is located. This function is effective at any locate points other than the REC END point.

3. Track shift key [TRACK SHIFT/ALL INPUT]

When selecting a recording track, this is pressed to shift to the selectable track. With each pressing of the key, the TRACK SHIFT LED will sequentially switch in order of: "Extinguish" - "Lighting of 9-16"

-"Lighting of 17-24" - "Extinguish" to indicate the modes listed below

Auto Return mode:

When the END point is reached during playback, the START point is automatically located in this mode. This function is effective only when the START and END points have been specified.

<Note>

The Auto Return function is works only during playback. In the recording mode, the START point will not be located automatically when the END point is reached.

11