Fostex D2424 manual Executing Paste, Single Undo/Redo Paste

Model D2424 Reference Manual (Editing Tracks)

Press the [EDIT] key again to get ready for the paste operation.

“Copy Paste?” or “Move Paste?” flashes on the display.

8. Press the [EXIT/NO] key or the [STOP] button.

The recorder exits edit mode and displays the previous Time Base indication.

9.Turn off the [RECORD TRACK] select key of the copy (or move) source track.

Executing Paste

4. Press the [EXECUTE/YES] key again.

The display indication enables you set the number of the paste operations. The number and “SURE?” flash. At this time, the flashing [RECORD TRACK] indicator becomes continuously lit.

FlashingFlashing

SURE?

OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

Track display ( ) of the item to be copied (or moved) will change to lit.

5.Select a destination track to paste data.

All selected track’s indicator light up.

You can select only mono tracks as the destination of a copied or moved mono track. If you copied or moved adjacent odd-even tracks, you can select only adjacent odd-even tracks as the destination.

If you do not select any tracks, the data will be pasted back to the copy or move source track.

6.Turn the [JOG] dial to enter the number of repeats (Repeat = **).

You can enter up to 99. However, this is automatically limited by the available recording source on the disk. That is, if the disk has enough free space, you can set up to 99 repeats. If the disk has only a small amount of free space, the [JOG] dial allows you to set a lower number of repeats.

7.Press the [EXECUTE/YES] key.

“Copy Paste” (or “Move Paste”) flashes and the duration of the pasted data appears as a negative number on the display.

This number will count down as the paste operation proceeds. When the paste operation is complete, the flashing “Copy Paste” (or “Move Paste”) lights up continuously, and “COMPLETED !” is displayed.

<Note>

If you try to execute the paste operation by pressing the [EXECUTE/YES] key when the disk has insufficient free space, “Over !” appears on the display and edit mode is cancelled.

In this case, you need to delete unnecessary data or programs.

•Refer to the following section, “Erase,” “Deleting a Program,” or “Duplicating a Program.”

•Refer to page “70” for more information on erasing.

•Refer to page “37” for more information on deleting a program.

•Refer to page “36” for more information on duplicating a program.

Single Undo/Redo Paste

You can single undo or redo a Copy & Paste and Move & Paste operation.

•To restore the data that existed prior to the paste operation, press the [UNDO/REDO] key.

•To restore the pasted data after you undo the paste operation, press the [UNDO/REDO] key again.

When you press the [UNDO/REDO] key, the recorder will undo or redo the operation immediately, and display “Undo !” or “Redo !” and “COMPLETED !”.

<Note>

This function only works when this recorder is in the stop mode.

<Note>

If you perform one of the following operations after you use the Copy & Paste or Move and Paste operation, the Undo/Redo function will no longer be effective.

1.If a new recording has been made.

2.When a new editing job is executed (such as Copy & Paste, Move & Paste, Erase).

3.While in the AUTO PUNCH ON mode, when the AUTO PUNCH IN point is passed in the PLAY (or RECORD) mode.

4.If the power was switched off.

5.If program select was executed.

6.When multiple undo is executed.

68