Fostex D2424 manual Setup of input/output Balance/Unbalance BAL/UNBAL? menu, 126

Model D2424 Reference Manual (Changing the Initial Setting <SETUP mode>)

Setup of input/output Balance/Unbalance (“BAL/UNBAL?” menu)

Whether the D2424 rear panel analog input/output connectors should be set to balanced or unbalanced lines can be setup at the "Setup of input/output balance/unbalance" menu. Initially, it is set for unbalance but can be set to balanced input/output.

Because the setup content is registered in the D2424 internal System ROM, it will be held even though the current drive E-IDE hard disk is replaced.

• Initial setting:	[UNBAL] (Unbalanced)
• Option:	[UNBAL] (Unbalanced) or [BAL] (Balanced)

*The settings cannot be saved and loaded as part of the song data.

*The settings are maintained after you turn off the power to the recorder.

Setting the input/output balance/unbalanced function

1.While the recorder is stopped, press the [SETUP] key to enter SETUP mode.

2.Turn the [JOG] dial to select “BAL/UNBAL ?” (“?” flashes), then press the [EXECUTE/YES] key.

The display will change as shown below and the presently setup item will be displayed.

The blinking "?" will disappear when the [EXECUTE/YES] key is pressed and the lighted item will change to flashing.

"UNBAL" will flash in the initial setting.

SETUP

OL			OL	BIT	24
0	0
3		3			FS
6			6
9		9			kHz
12		12			CLOCK
18		18
24		24			INT
30		30
42	42
∞			∞

3. Select the “BAL” or “UNBAL” with the [JOG] dial, then press the [EXECUTE/YES] key again.

The selected item will be registered and "?" in Step-2 will return to flashing.

4.Exit from the SETUP mode by pressing the [EXIT/ NO] key (or [STOP] button).

To cancel the operation, or to restore the setting obtained prior to the [EXECUTE/YES] key press, press the [STOP] button or the [EXIT/NO] key. Each time you press one of these keys, the recorder returns to the previous hierarchy level of the menu, and finally exits SETUP mode and displays the previous Time Base.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Flashing

SETUP

OL	OL	BIT	24
0	0
3	3		FS
6	6
9	9		kHz
12	12		CLOCK
18	18
24	24		INT
30	30
42	42
∞	∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

126