Fostex D2424 manual Pause mode, Auto Play mode, Repeat mode

Model D2424 Reference Manual (Chain Play function)

Chain Play function

“Chain play” functions to playback, in any order, the tunes recorded on a multiple number of programs. There are three modes of chain play and each operates as shown below.

Before executing these modes, “AUTO RTN START point” and “AUTO RTN END point” must be set for each program. For details, please read the explanations starting from the next page.

AUTO RTN START point		STOP		AUTO RTN END point
PGM 02
			Playback
	AUTO RTN START point			AUTO RTN END point
			STOP
PGM 05			Playback
	AUTO RTN START point			AUTO RTN END point

STOP
PGM 01		Playback
AUTO RTN START point		STOP	AUTO RTN END point
PGM 02			Playback
	AUTO RTN START point		AUTO RTN END point
PGM 05			Playback
	AUTO RTN START point		AUTO RTN END point
PGM 01		Playback

<Pause mode>

In the pause mode, as shown in the example on the left, upon reaching the “END point” at playback of program 02, the recorder automatically stops at the “START point” of program 05 which is to be played back next.

If chain play is executed again at the stopped point, it will stop again at the next program 10 “START point.”

<Auto Play mode>

In the auto play mode, as shown in the example on the left, upon reaching the “END point” of program 02 started in playback, the recorder will automatically playback in setup order between the “START points - END points,” and, at the moment playback is finished at the “END point” of the last program 01, stops at the “START point” of the first program.

AUTO RTN START point		AUTO RTN END point
PGM 02		Playback
	AUTO RTN START point	AUTO RTN END point
PGM 05		Playback
	AUTO RTN START point	AUTO RTN END point
PGM 01	Playback
		57

<Repeat mode>

In the repeat mode, playback is repeated until the above auto play mode is canceled.

<Note>

If power is switched off and then switched on again while set to the Repeat mode, playback will automatically start from the first program.